I am not particularly expert at [i]command line[/i] repairs, but [i]fixmbr[/i] is supposed to be a valid command in XP.
1) Boot the computer from the installation/repair CD
2) When the text-based part of Setup begins, follow the prompts. Press the [b]R[/b] key to repair a Windows XP Pro installation.
3) To replace the Master Boot Record (MBR), at the Recovery Console commant prompt, type [i]fixmbr[/i]
4) Verify whethe you want to proceed. Depending upon the location and the cause of the corruption within a damaged MBR, this operation can cause the data on the hard disk to become inaccessible.
Alternatively, use DiskProbe to replace the MBR and Partition Table. If you have backed up the MBR by using DiskProbe, you can use it to restore the MBR on any disk that is not used to start the computer. Restoring the backup MBR rewrites the entire sector, including the partition table.
For more infomration about restoring backed up MBRs by using DiskProbe, click [b]Tools[/b] in Help and Support Center and then click [b]Windows Support Tools[/b].
To replace the [b]Boot Sector[/b]:
1) Boot computer from installation/recovery CD
2) Press [b]R[/b] to repair
3) At the command prompt, type: [i]fixboot [drive][/i]
The preceding was transcribed from the Windows XP Professional Resource Kit (Microsoft Press, 3rd ed., 2005), ch. 28 (Troubleshooting Disks and File Systems), pp 1146-1150.
Hope this helps.
Rick/Portland, OR