Discussion Locked

"System Error 59 " Unexpected error .

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I'm getting an error whenever I use net use command from an Nt workstation m/c to map a drive on a NT server. The error says "System Error 59" Unexpected error has occurred. I'm trying to map over WAN from remote sites using lmhosts file & TCP/IP isthe only protocol. In the past this worked fine, but since today this problem has started. I've tried reinstalling SP 6A on the server, all the remote w/s already have SP6A.
Any clue to whats wrong???

5 replies

by mr miron

Are you using the command prompt or the cmd prompt? Try using the cmd prompt. from the run, type cmd

by maxwell edison

When you use the NET USE command to a server and share that does not exist, the
following error message may appear:

Error 59: An Unexpected Network Error Has Occurred

In addition, attempting to connect to a nonexistent server and share using File
Manager causes the system to stop responding (hang). To quit Windows for Workgroups version 3.11 and reboot the computer, press CTRL+ALT+DEL and press ENTER when the blue screen appears.

This problem occurs if the "DNS for Windows Name Resolution" option is enabled and the IP address for a DNS server is not specified in the DNS Server search list.

RESOLUTION:

If a DNS Server is not available, disable the "DNS for Windows Name Resolution"
option under Windows Networking Parameters in the Advanced Microsoft TCP/IP
Configuration dialog box. If a DNS Server is available, make sure that its IP
address is added to the DNS Server search list in the Microsoft TCP/IP -
Connectivity Configuration dialog box.

This discussion is closed to new replies.