Question Locked

T1 Line

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We have just move to a t1 line that includes our phone and data. I am try to configure my server to work and I am not quiet sure how to achieve this. I have a 2 Nic cards, and I have been told this is the way to confgre the service. I also have a linksys router, which I am not sure I need anymore. I also have an unmanaged 24 port switch. Any help with the configuration is greatly appericated.

2 replies

by avradutta

The T1 line from your ISP should terminate at the mux and a serial line from the mux to the modem will connect your routers serial interface with a V.35 or smart serial port.
The switch should connect to the router and there should be two uplinks from the switch to the the servers via the NIC cards.
This is a very general setup.
Your question ais a little vague because how is the voice connected, and how are you using it? Is the T1 connected to a pBX and you want to use your data through that? Or have u terminated the T1 at a router?
Please give some explanation onf the setup a little more.

This discussion is closed to new replies.