Discussion Locked

TCP/IP addresses for 2 networks

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Work network and home network are 2 distinct entities. I have tried different user profiles to have the different settings but the last group of settings entered becomes the default for all. Entering different hardware profiles doesn't do the trick either. Besides using Netswitcher, or manually editing the IP addresses each time, are there any other ways to combat this?

3 replies

by ins413

Yes there is. Using the netsh command works very well. I am not sure where I found this tip, and it probably was here at thechrepublic, but I kept a copy of it. Again, it works well.

Switching Between Multiple W2K Network Configurations

Ifyou are for example using a Notebook in various different Networks (e.g. at different Customer Sites), You always have to change Network Settings like IP / WINS / DNS Configuration /DHCP. The "netsh" Utility gives you the possibility to "dump" all settings into a file, that you can later use to restore your complete Network settings.

To Save the current Settings:

netsh -c interface dump >networksetting.txt

You can then create a dump file for every Network that you use.

To Load theSettings again:

netsh -f networksetting.txt

In this way you can easily switch between different Configuration Sets.

by mtr_prez

THis tip worked a treat. Just made some batch files and popped them on the desktop and was quick and easy.

This discussion is closed to new replies.