Question Locked

Terminal Server Settings

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I've just created a new terminal server (Win2003) and for some reason my display settings have on the thin clients are disabled and are set at 800x600 (16bit Medium color). Any way to open this up so the clients can have a higher resultion (some of my applications needs a higher resolution)?

The thin client is a neoware c50.

3 replies

by bart777

The color depth is set on the server in the Terminal Server Configuration tool. By default it is set to 16 bit color. You can change it to 24-bit, I'm not sure if you can go any higher. The screen size is normally set at the client side. If this a thin client device it should be in the system config if it can go any higher. There may also be an admin interface that you need to go into. I'm not familiar with the neoware but other devices are contoleed at that level.

Best of luck.

by jbaker

One thing I have noticed is the Thin Client (in my case it's the Neoware c50) has a Desktop/Display setting of 800x600 to 1024x768 setting. This over-rides the display settings on the server.

However, is there a way to set this as a policy or a server setting?

This discussion is closed to new replies.