Question Locked

The device driver for the ATA Channel 1 Device is preventing the machine

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

The device driver for the ATA Channel 1 Device is preventing the machine from Standby

We are facing lots of issues on Dell XPS- 420 with ATI Radeon 2600 Card

The device driver for the ATA Channel 1 Device is preventing the machine from Standby

For now we have tried updating Intel Matrix Storage.

Turned off Hybrid Sleep

Updated the drivers for display card

Tried changing the power state in Bios

Updated Bios to latest version

Downloaded Drivers : http://game.amd.com/us-en/drivers_catalyst.aspx?p=vista32/common-vista32

Still no fix.

Any help on this is much appreciated

Kiran T.J

2 replies

by dumphrey

is most likely a cd or dvd, or secondary hard drive, as channel 0 would be your hard disk. Make surew you have updated ata controllers from dell. In particular, the chipset drivers, and disk controller (which you did already, Matrix Storage Manager, should be 19 Megs). Also check in your bios to see if disks are allowed to be put to sleep (not a normal Dell bios option, APM/ACPI is usually an on/off option), and check power settings in your control pannels as well.

This discussion is closed to new replies.