Question Locked

Too Many Sound Drivers

0 helpful
17 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a Labtech headset which I bought to use with Skype. Unfortunately, every time I have used it I get this horrible echo. Someone told me it's because there are two sound drivers running. I can't figure out where they are.

When I go into the Device Manager, under Sound, video and game controllers I have:

- Audio Codecs
- Legacy Audio Drivers
- Legacy Video Capture Devices
- Media Control Devices
- Realtek High Definition Audio
- Video Codecs

Under Sounds and Audio Devices Properties I have the same six, plus the DVDRW and a SCSI CDROM Device. I don't get multiple options when I see the Line In/Mic In pull-down menu.

My Master Volume console has Wave, SW Synth, CD Player, Front, Rear, Line Volume, Front Green In, Front Pink In (headset jack) and Microphone. I set Microphone to MUTE.

The thing that freaks me out the most is one day I accidentally hit the Video option on AIM and I could hear myself talking...without a microphone PLUGGED IN! I have a Compaq Presario SR2038X with Windows XP, SP3.

I would be incredibly grateful to anyone who can point me in the right direction (link, YouTube video?) or could just tell me what to fix to get rid of this ghost audio I have.

Many, many thanks!

17 replies

by thechas

I don't think you have a driver problem. However, as CODEC style audio systems use system resources for a lot of the sound functions, the amount of software that runs in the back ground can slow down audio performance.

Try turning off some of the software that runs in the system tray and see if the echo improves. If so, you may want a dedicated sound card rather than the on-board sound.

Headset echos often come from poor mechanical isolation between the boom mic and the headphone.

Try moving the mic around to different positions. Or, try a different set of headphones along with the boom mic to see if the echo goes away.

Chas

by vze2363v

Thanks for the reply. I tried moving the mic around, but there isn't a lot of room for play. I guess my next move would be to see if an independent sound card would work.

I asked someone about the headset and they said it was a good one (not spectacular, but good).

I'm not sure how to identify what you're talking about in the system tray...I've been baffled for a long time about what all those files are for. For example:

dpupdchk.exe
svchost.exe - system
avgcc.exe - AVG?
alg.exe - AVG?
wmiprvse.exe
dllhost.exe
mcrdsvc.exe
MDM.EXE
mDNSResponder.exe
avgemc.exe
avgamsvr.exe
arservice.exe
svchost.exe - local service
svchost.exe - network service
smc.exe - system
svchost.exe - system
svchost.exe - network service
svchost.exe - system
lsass.exe
services.exe
ViewpointService.exe
winlogon.exe
csrss.exe
smss.exe
svchost.exe - system
svchost.exe - local service
nvsvc32.exe
LSSrvc.exe
ehSched.exe
ehrecvr.exe
System
System Idle Process

Do I SERIOUSLY need all those svchost.exe entries running? They seem redundant. How would I get rid of them or are they there because I have a wireless router?

by older mycroft

Svchost.exe is basically a carrier in function: it's purpose is to launch various other functions through a common means.

Thus there are always multiple entries all listed as 'svchost.exe'. Each one though, although having the same name, is distinct and separate. The main danger here is that you could disable some of these entries and you computer would continue to operate properly. this is because the entry you have just deleted is already resident in memory.

However, the next time you start your computer from cold, all these deleted entries will fail to load, and the computer will halt (and fall over) at the first missing entry it encounters!

If you seriously need to satiate your curiosity, take each entry ~one at a time~ and Google it.

For instance, [u]dpupdchk.exe[/u] entered into Google will bring you this link at the top of the results page:

http://www.processlibrary.com/directory/files/dpupdchk/

These information pages should only be used to find out what each process is (and perhaps what it does) - it is NOT a de facto permission to delete it. ;)

by older mycroft

You should have a second speaker icon in your systray, in addition to the standard Windows one. It takes you to the Realtek Audio Manager.

Right click this icon (mine is orange) and select 'Sound Manager' > 'Microphone' [TAB].

You will see 2 bullet points: one for Noise Suppression and one for Acoustic Echo Cancellation.

One or other or both of those is what you want. :)

by vze2363v

Something weird has been happening to my icon tray by my clock. It seems there are less and less icons there (especially after I upgraded to SP3). My Weather Channel icon used to pop up there all the time, but now it has fits when it tries to load.

I went through my start menu and I can't find ANYTHING with Realtek's name on it. I looked in my "Add or Remove Programs" list and Realtek High Definition Audio Drive is mentioned there, but it has no size annotation(?). It's not listed under my start menu for Programs either. It's not in File Manager under my C: drive or Program Files sub-directory. It's not under any sub-directory in Windows. (shrug)

Is there someplace I can download Realtek or should I just go into REGEDIT and rip it out piece by piece? Doesn't it need the Realtek Drivers for things to work?

Many, many thanks again.

by older mycroft

When you find it, you'll also find a bullet point that will invoke a systray icon. :)

by vze2363v

Dude, you seriously rock. For some reason my control panel thing is in list mode instead of icons and the Realtek thing was all the way at the top instead of near the bottom alphabetically.

I still have echo. Unless I turn the mic down really low. Is it possible there are two mic drivers running at once?

by older mycroft

When you're looking at the Control Panel, have a look at the horizontal toolbar at the top. Hover yor pointer over the last icon on the right, it should say 'Views'. When you click on it, you'll find that your current view is set to 'Details'.

Change it so that the bullet point is sitting beside 'Icons' - there, you've got your ICONS back.

Now, as to you still having an echo. I would advise revisiting the controls within the Realtek HD Audio Manager: there are a vast number of individual controls in there, not least of all - you may have one of the sound effects enabled, which has been known to cause feedback with headsets.

I've got a Realtek HD Audio Manager AND I'm using a Labtech headset, so if I've not got an echo it stands to reason that you've got a rogue setting somewhere, that I've got turned off.

Best idea is to open the Realtek screen, leave it open, then invoke your Skype system onscreen and make a call. You can adjust any setting you want while you are active within Skype.

[u]Another point:[/u]
You have got Skype set up properly, haven't you?

Open your Skype main page > click on 'Tools' > 'Options' > 'Audio Settings' [left hand column] > tick box for 'Let Skype adjust my audio settings'.

Also, make sure the entry for Microphone features "Realtek HD Audio Input" and that the entry for Speakers features "Realtek HD Audio Output".

[i]While your Control Panel is set to Details mode, clicking on the header-bar above the 'name' column will set that column in either 'A to Z' or 'Z to A' order. THAT might explain why your Realtek entry was hiding at the top.[/i]

Let me know how you get on. :)

by vze2363v

My control panel doesn't do that...unless I'm trying to reach it the wrong way.



This is what it looks like when I try to access my Control Panel. When I click the right mouse key on Control Panel, it says I can Open or Explore, but when I choose either of those it grays out the icon that allows you to choose Details, Thumbnails, etc.

I reset everything in the Realtek control screens. I found someone with Skype who offered to help me check that out and am waiting for a blogtalkradio show I want to call in to for a test to see if where I'm trying to use the headset is the cause. MySpace karaoke doesn't seem to reflect that there's been any change so I guess we'll find out later tonight. When I was following those directions for Audio Settings in Skype, it does not allow me to select Realtek HD Audio Input under microphone features, only Line In/Mic In.

Thank you so much for all the information! One of my friends is getting ready to get a headset and I've learned a lot going through this on my own. Hopefully, I'll be able to help her if she has any problems.

by thechas

If turning the mic input level way down reduces the echo significantly, your problem is acoustic feedback from the headphones to the boom mic.

Try holding the mic with your hand and see if that also reduces the echos.

Unfortunately, the best fix for your problem is a better quality headset.

Chas

by vze2363v

Do you have any suggestions of brand names that you know are good quality? I'm looking for abwall direct land line headset as well.

Many thanks!

by vze2363v

Thank you for the information. I LOVE the processlibrary web site!

by thumbsup2

You said: "The thing that freaks me out the most is one day I accidentally hit the Video option on AIM and I could hear myself talking...without a microphone PLUGGED IN! I have a Compaq Presario SR2038X with Windows XP, SP3."

Does your video cam or the system itself have a built-in microphone somewhere? Some cams do. Have you tried unplugging it to see what happens? How about the monitor? Is there a built-in microphone in it?

by vze2363v

When the AIM think happened, I thought for sure there was a microphone in the Monitor, but there aren't any holes to support that theory. I also went through the monitor set-up options through the monitor directly and there are no indications of a mic in it. I did unplug my video camera, but it was one of those old cameras EarthLink gave away when they first offered internet service, so I really don't think there was any mic ability in it. I was wondering if my Compaq Model (Presario SR2038X) has a built-in mic somewhere. I couldn't find any information about it, but I'm finding there are a lot of things I didn't know about my computer...and Windows XP.

Thanks for any info you can give me. :)

by thumbsup2

You have your start menu set to classic view. To change it so you can actually connect to the Control Panel folder view (instead of a list), right click your Start Button and choose properties. Next to the Classic View, click Customize. Inside, UNCHECK the 'Expand Control Panel' option.

Then, when you click Start and point to Settings, it will show Control Panel as an option to click on. Once you see the Control Panel folder view pop up, you can change the view to Details.

by thechas

Plantronics is the first brand that comes to mind. They have been in the headset business for over 30 years.

Jabra may be another good choice.

The 2 main ways to reduce acoustic coupling are with isolation damping or controlled mass.

With isolation damping, you can feel a slightly loose rubber / elastic physical connection between the headphone and the mic boom.

Controlled mass on the other hand is not visible when you look at or feel the product. Controlled mass can be implemented in the choice of materials, the design of the materials, and even the thickness of the materials.

One way to check for mechanical resonance in a design is to flick a fingernail at it. If the item vibrates it has not been designed to control or reduce vibration. If all you get is a dull thud, then the mass and structure have been designed to reduce mechanical resonance.

Chas

This discussion is closed to new replies.