Question Locked

Transfering a Hard Drive with XP to a newer computer

0 helpful
19 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Is there anyway I can just transfer a hard drive loaded with Windows XP (with Service Pack 3 and all current updates) to a newer machine without having to reinstall everything? I tried to do this and I kept getting the "blue screen of death", and the machine went into a perpetual reboot. I'd like to get rid of the older machine, but just not ready to give up XP.

19 replies

by shasca

Unless the PC's are of the same or dang near configuration, you won't have success. You have a new PC that has no harddrive in it? The xp drive will most likely need to be used as a secondary/slave drive, and not the primary.

by thumbsup2

... and if you don't know what you're doing, you could corrupt XP so bad it won't ever boot.

(1) The old hard drive will not have drivers for the new system and that will cause BSOD's until it can work itself out, if ever.

(2) Not all new equipment has drivers for the older OS, XP. Search for XP drivers for that specific hardware (motherboard, video, sound, network) and get them downloaded and stored on removable media (CD or Thumb Drive) before you boot to the XP hard drive. If you can't find XP drivers for everything, you shouldn't go any further.

(3) Try booting the XP drive in Safe Mode and, at the very minimum, install the XP drivers for your motherboard, if you've been able to find them, then reboot to regular mode.

(4) You will need to reactivate XP since it has been transferred to a different computer. This MAY require a phone call to Microsoft and they're going to ask you some very specific questions.

by rob miners

is to connect the drive to the new System and do a Repair/Install by booting from the XP CD. You will have to reapply service packs and reactivate. Follow Thummy's instructions and get your device drivers for the new System.

by tankerdriver

Thanks for your input sir. You confirmed what I had been thinking. I was "hoping" there may have been a trick someone knew to get around this.

by thechas

First, if the old PC has an OEM copy of XP, you may not be able to transfer the license to the new computer. This is very true if you purchased the old computer with XP already installed.

Next, you need to make sure that you can get XP drivers for all of the hardware in the new computer.

A third thing to consider is that XP mainstream support from Microsoft will end at the end of April this year. While I have encouraged many people to stick with XP when getting new computers, once mainstream support ends, for most people it will be time to move to Vista when setting up a new system.

Taking all of the above into account, there is a fairly quick way to transport XP to a new system that works much of the time.

On the old system, uninstall ALL of the hardware devices. Shut down the system and move the hard drive to the new system.

As you boot up, make sure to press F8 to get the Windows boot options. This is CRITICAL. You must get the boot options screen the first time you boot.

Choose to boot into safe mode.

Allow Windows all the time it needs to boot up into safe mode. Once safe mode has completed the boot process, shut down and boot into normal mode.

Install your drivers starting with the drivers for the new motherboard. Reboot as directed.

Chas

by mhofu

The method Chas gave works I had never thought of it and I decided to try it on one of my test machines it works like a charm.
Thanks Chas

Fred

by shasca

That is excellent advice Chas. That should work perfectly. I don't know what I was thinking with the Bonehead answer above. I must have had more fun over the weekend than I was aware.

by rob miners

I forgot that the OP still had access to the original System to be able to make the changes.

by tankerdriver

Hey thanks.. I will try this. I have a newer machine that has VISTA on it already, (this is the machine I'll be transfering to). I like Vista, but I have a lot of old pgms installed under XP, that still work, and I'm worried that if I try to install "OLD" programs under Vista, they'll overwrite newer files and screw everything up. I just hate to bye to programs that are useful and still work.

by thechas

Make sure that you can get XP drivers for all of the hardware in the new system before you try the transfer.

As you plan to attempt to move this drive to a system that came with Vista, it is possible that some of the hardware will not have XP version drivers available.

While this is more of an issue for notebooks than for desktop systems, it is still worth checking.

Also, does the new system support standard IDE? New OEM systems may only have SATA support.

Chas

by tankerdriver

I do have the original install disk. I also have the SP2 update CD I ordered from Microsoft. If anything I will have to download SP3 updates.

by seanferd

Procedures shown detail how to transfer the HDD to a system with different hardware. Check all the posts.

I don't know how the partition table is involved here.

Could you explain what else you need to know?

by tankerdriver

I have never posted a question in a forum like this before. I am humbled by all of your responses. Thank you all very much for your input.

by tankerdriver

I have been given a lot of information. Now all I have to do is make the time to do the transfer.

by tankerdriver

I do know that the computer has an IDE port , but nothing is connected to it.

This discussion is closed to new replies.