Drivers are the number one issue for installing XP onto a SATA drive.
While the installer is loading, press F6 at the prompt and load the SATA drivers when the installer asks for them.
Make sure that the drivers are extracted from any zip or other archive format they may be in from the download or on the install disk.
The second issue is that the SATA ports on some motherboards are configured for RAID. Even if you have only one drive, you need to go into the BIOS RAID setup and configure the drive as a RAID array. (Yes, I know a one drive array just sounds strange.)
The only other SATA issue I am aware of is that some of the SATA interface cables are rather cheap and can be intermittent. If you have any doubts about your cables, find some with high quality connectors on them.
Chas