Question Locked

Trying to configure 2003 for lan routing

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have setup?2 test enviornments which consists of Windows 2003 vm and an?XP vm on network 1 and Small Business server vm and an XP vm on network 2. The network configurations are as follows.? From XPvm1, I can ping both NICs on Win2003 but not the host (192.168.1.66). From XPvm2 I can ping the host (192.168.1.66) IP but not from the host back. I have setup RRAS the same on both servers but am getting different results. Ultimately I would like to have the server VMs act as routers to/from the 192.168.1.0 network. There are no firewalls enabled. Any help is appreciated.
Host?: 192.168.1.66 255.255.255.0 192.168.1.1
Win2003: Nic1: 192.168.1.10 255.255.255.0 192.168.1.1, Nic2: 192.168.2.1 255.255.255.0 -no gateway
XPvm1: 192.168.2.10 255.255.255.0 192.168.2.1
SBS: Nic1:192.168.1.15 255.255.255.0 192.168.1.1, Nic2:192.168.3.1 255.255.255.0 -no gateway
XPvm2:192.168.3.10 255.255.255.0 192.168.3.1

2 replies

by robo_dev

you cannot have a 192.168.1.x -router- 192.168.1.x network, that's called an ambiguous non-contiguous network....you can't get there from here.

http://technet.microsoft.com/en-us/library/cc779089.aspx

Is there a router between the two networks? if not, then the reason you cannot ping anything from the xpvm1 is that it's default gateway, should be the internal interface of the router, 192.168.1.10. Does 192.168.1.1 exist?

Also the default gateway of the 2003 box should be the same, 1.10 (itself), because a router, by definition, knows about the other interfaces.

Similarly, the default gatweway of SBS and XP VM2 would be the inside interface of the router, or 192.168.1.15

If you want to be able to ping across different networks, you would need to set static routes in the XP boxes to get you there.

This discussion is closed to new replies.