Question Locked

Two Netgear Routers - No Tech Support

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi all. I am presently using a Netgear FVS318V3 wired router with no problems. I just bought a Netgear WNR854T wireless router.

I called Netgear support to ask how to make the two routers work together and they tried to charge $35 per hour... Blood pressure is almost down...

Anyway, I have some understanding of networking, but not a lot.

I want to insert the wireless router behind the FVS318V3 router and enable wireless network access and internet access through the modem plugged into the internet port on the wired modem.

My wired network IP is 10.94.111.1. My question is: should I assign a dedicated IP to the wireless router, and if so, do I then disable DNS on the wireless? With DNS enabled, I can get the wireless router to assign IPs, but there is no internet access through the wireless router.

I have the wireless router (internet connection) plugged into a port or the wired router.

Appreciate some here folks.

THanks,

Hank

2 replies

by oh smeg

A CAT 5 Cable running from one of the RJ45 Ports in the first router to the Uplink Port on the WiFi Router.

You then need to plug in 1 X Computer via a CAT5 cable to the WiFi Router and open a Web Browser type in the Routers HTTP Address and setup the WiFi Router as per the Instruction Manual. Be sure to include MAC or WEP Addressing for the WiFi. Once you have this setup correctly according to the Manual you should need to reboot the Router this is again covered in the Manual and doesn't involve logging out of the Routers Setup. When this has rebooted you can exit the setup and test for an Internet connection. If you have set it up correctly you can now connect to the Internet, if you can not then it's not setup correctly and you'll need to go back into the Setup Procedure and reconfigure the Router till it works.

Now for the problems with using 2 routers in the one LAN. Anything connected to the second router will be isolated from the main side of the LAN so if you want to share Files & Printers through the router to the other computers connected to the first router forget it as this isn't going to happen. By using a Router you have effectively created a Child Domain which isn't the correct term but it's the only one that comes close to what you have done here.

This is Ideal if you want to isolate the WiFi side of the LAN from the wired side as you can have complete strangers walk in access the Internet without jeopardizing your Data Security. Great way to go if that what you want but if you wanted the WiFi side to be able to share Files & Printers with the Wired side of the LAN you should have inserted a WiFi access point without a router involved. Then all that is necessary to setup is the WiFi Access Point and not the Router which should be regularly reloaded with firmware to maintain security.

Col

This discussion is closed to new replies.