Discussion Locked

UNABLE TO LOG ON

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a mixed network environment of Windows NT4 & Windows 2000 Servers(Member Servers). One Windows NT box acts as a PDC. However all my Windows 98 Clients cannot log on.Their log on runs a script that maps drive letters. What could be the problem?
Thank you for your attention.
Vito.

4 replies

by oz_media

You may want to check protocols. I've seen the same incident in a mixed Netware encironment where the 98 clients needed to run IPX as well as IP. Not sure how this relates to a Windows only network but until the nest clientwas released they all needed IPX to show up. ?!

by vitosemat

The windows 98 machines are configured through the Network neighborhod and IPs are DHCP assigned. We have no IPX protocols on the network. All DNS/WINS/IP are okay. Infact one can release and renew these settings with no problem at all.

by assamite

How have you configured the 98 machines networks settings? Have they been configured to log onto a NT domain, have you checked all the DNS/WINS/IP settings against a working nt based system?

by vitosemat

The windows 98 machines are configured through the Network neighborhod and IPs are DHCP assigned. Interesting though, if i keep ping the PDC and then restart, enduser can log on. But after sometime, are unable to log on.All DNS/WINS/IP are okay. Infact one can release and renew these settings with no problem at all.

This discussion is closed to new replies.