6 replies
by shireesh.groups Accepted solution
by bart777 Accepted solution
by mjd420nova Accepted solution
by thumbsup2 Accepted solution
Look at the printer and see if it is set to the LPT1 port, then look at the adapter and see if it has set itself up as LPT2. The printer must be using the correct port to find communication.
However, not all devices, especially OLD printers, are capable of communicating through a USB adapter. Some of them depend on IRQ's/DMA's and other settings which don't necessarily get assigned to the USB adapter. Read the specifications required for that printer to see if it NEEDS something the adapter is not providing.
by dnewell943 Accepted solution
by w2ktechman Accepted solution
parallel to USB sometimes works well, other times it doesnt work. I have run into several printer types that I just couldnt get working with it.
As Bart mentioned, for these instances, a Print Server should work just fine. I prefer IP based myself.
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending