Question Locked

Update a sysprepped image

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi
i use sysprep to deploy images to many different pcs. I need to update frequently my image. When i re-sysprep the modified image this image reloaded into different hardware doesn't work and the pc continue rebooting. The time sysprep need for the preparation this time is lower than the first time.
There is a shema i have to follow to reach my goal?
Thanks

4 replies

by wizard-09

When you do a sysprep it will only work on the same make and model of the machine you use system prep, so if you have many different machines you need to take a system prep of each machine this is due to different hardware and the like.

Keep us informed as to your progress if you require further assistance.

If you think that any of the posts that have been made by all TR Members, have solved or contributed to solving the problem, please Mark them as Helpful so that others may benefit from the outcome.

by alezola

Hi
i can use the sysprepped image with so many different machines, but my goal is to update an existing image and the re-sysprep it.
It doesn't work!!

Thanks

by tim.dhaliwal

Sysprep does not allow you to re-sysprep an image. You have to create an image of your drive just before you run sysprep on it. Use this pre-sysprepped image to make changes in the future. After making changes to your image then you sysprep it. The image will work this way. Also, you can use any image on any hardware configuration as long as the HAL.dll files on the systems match.

I hope that helps.

This discussion is closed to new replies.