Question Locked

Upgrade W2k Domain to W2k3 with Exchange 2000

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I currently have a single server W2K domain running Exchange 2000. The client is adding a W2k3 server to take over normal DC tasks (DNS, DHCP, logons, etc.), and leaving the W2k/Exchange 2000 server until March 2008 at which time they will purchase another W2k3 server and replace the W2k Exchange server.

The basic migration for *the first part of the project* seems easy enough:
- Install W2k3 server as member server,
- Run adprep / forestprep and adprep /domainprep from the *second* W2K3 CD
- DCPROMO the W2k3 server.

Since Exchange 2000 won't run on Windows Server 2003, I assume I can't install the Exchange Tools on the new server and must continue to use the AD on the old server to create/modify mailboxes. Is this true?

Am I going to get hit by any nasty surprises because I missed something? Any one see any issues I'm going to have?

Thanks for your time!!

4 replies

by bart777

Just a couple of things to watch for.
When you move DHCP the leases from te old box will still be in place. There is a risk of duplicate IPs unless you are going to have all of the machines do a release\renew when you move forward. An option to this would be to set the lease time on the old server to no more than 8 hours. That way after 4 hours it will look to the new server for an address and if you do this over a weekend or after hours the users will never know. Also don't forget any reservations. The other way to do it would be to setup a new scope. That would depend on reservations and exclusions tho.

And don't forget to make the new server a GC and migrate the FSMO roles.

1 last thing, if they are present.... PRINTERS.
The printmigrator from MS works quite well for that.

Best of luck.

by cj_mcnix

Thanks for the info. I found an old post from 2005 on here that mentioned Q325379 as the only thing to be concerned about for the domain upgrade.

Unfortunately, I having some difficulty understanding the document. In particular, I am trying to decipher what the following sentence means in Scenario 2: "If Exchange 2000 schema changes have already been installed but you have NOT run the Windows Server 2003 adprep /forestprep"

What schema changes are they referring to? The changes made to the AD when Exchange was first introduced, or am I missing some patch or add-on I need to do to make additional schema changes?

Finally, just to verify; do I run the adprep commands on the NEW server, or the existing?

by bart777

1 in AD and 1 for Exchange. When you do an upgrade of exchange it does it's own schema upgrade. Since you're not doing anything with the Exchange server it won't matter. I would make sure that the DC is fully patched before I start tho. And tehn ahve a full system backup, but I'm sure you already have that in the plan. :)

As for the ADPREP you will do that on the existing DC.

This discussion is closed to new replies.