If the drive is set up as a NTFS volume, your only hope to go back to W98, and save data files is to use Partition Magic to change the drive back to a FAT32 volume.
Sorry, since the W2K and W98 registries are not compatible, you WILL need to re-install ALL application software.
There may be an option, IF you installed W2K from within W98 as an upgrade AND choose to save the old version.
Once the drive is converted back to a FAT32 volume, you may be able to un-install W2K and go back to W98.
Possible work-arounds:
Does the BIOS allow you to select the boot drive?
If so, you can install a second HDD with W98 on it, and boot to the W98 drive when you need to use the application.
For that matter, if you install a utility such as System Commander, you can add another hard drive and set up the system as a multi-boot.
Install a second hard drive as master, install W98, and use the NTFS reader software from www.systeminternals.com to retrieve the data files off of the W2K drive.
Since you do not have a floppy, the easiest way to install W98 is to set up a hard drive as a bootable drive, and copy the W98 CD to it.
I create a folder labeled Win98 and copy the entire CD to it.
I use a hot-swap bay in my system for setting up hard drives for new systems.
This makes it easy to copy drivers and patches to the new drive.
With the bootable hard drive installed in the target system, boot up and browse to the folder where you copied the Windows CD.
Run setup, and away you go.
Another possible work-around to install W98 on a PC with no floppy drive.
Boot up from a W2K or Me CD.
Exit setup.
Insert the W98 CD.
Browse to the CD drive and run setup.
Chas