Question Locked

USB devices freezing Windows XP

0 helpful
14 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

About a week ago or so, my computer started freezing whenever I plug in a device to one of my USB ports (I have 3 of them). I have to restart the computer to get it unfrozen. I have an HP Pavilion dv 8000.

I use an iPod shuffle, a webcam and occasionally a flashdrive. I used the flashdrive around the time this issue started, but I don't know if that was the cause.

This is what I've tried so far:

1. Uninstalled USB hardware in device drivers
2. Took battery out, waited 30 minutes, restarted
3. Ran the usbman test listed in a previous discussion of this topic and everything checked out. http://www.usbman.com/WebDrivers/Intel%20USB%20System%20Check/USBREADY.EXE

Thanks for any help!

14 replies

by robo_dev

Do a system restore to more than one week ago....

Do you have good anti-virus and anti-spyware? Malware infections can have unpredictable results.

by vlucinda

I tried system restore (it is enabled) to Dec. 21 and it failed. I tried again and it would only restore the system to Jan.7 (that day's date).

I run a full system scan with Norton Anit-virus every week and nothing has shown up.

I don't know if this could be related or not, but I have had some trouble downloading the last batch of MS updates. As I recall, they were all for Office products, though--nothing specifically for the broader OS.

by vlucinda

Thanks, it's good to know this is an option if I can't get any of the internal fixes to work. I am working as an English teacher in a developing country, so finding one here might be a bit more challenging than at home. not impossible, though.

by rob miners

would also be beneficial to the notebook, less wear and tear. Good luck finding one. :D

by oh smeg

The USB Ports? Something like a printer?

Well as you only have Norton's here you should try some Malware Scanners so download something like Malware Bytes

http://www.download.com/Malwarebytes-Anti-Malware/3000-8022_4-10804572.html?tag=mncol&cdlPid=10995429

Spybot S&D

http://www.safer-networking.org/en/download/index.html

Install, update and restart the computer in [b]Safe Mode[/b] and scan till the system is either clean or you [b]Can Not[/b] remove something.

Try again and use a Powered USB Hub this time if it still freezes as it is possible that the USB Ports have been overloaded and when you plug in anything that drains the 5 V DC Rail the system falls over.

If possible also test the USB Devices in another computer and check for correct function.

Col

by vlucinda

Everything I have with me goes in the USB ports.

Thanks for the links to the Spybot and Malware Bytes programs. I did a scan yesterday and they picked up some things that my Norton antivirus didn't.

by rob miners

Don't use you memory stick. Start with your PC first as Oh Smeg has suggested and then use the instructions below to Turn off Autoplay before cleaning the USB drive. It can always be re-enabled by reversing the instructions. Turn off System Restore at the first oportunity and re-enable it when you are finished.

How To Disable Autorun XP Pro

Go to Start Menu > Run and type gpedit.msc

Select Administrative Templates > System

Select ?Turn off Autoplay? from right.

Set the radio button to Enabled, and change the ?Turn off Autoplay on? to All Drives.

XP Home users will need to make the changes by editing the registry directly. To begin, click Start and then click Run

Type regedit and click OK. The Registry Editor window will open. Backup the Key before proceeding as it can be used to reverse the proceedure.

In the left pane, navigate to:

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer.

With Explorer highlighted right mouse click and select Export. Save the file as autoff.reg. It can be used to restore the Registry later on.

Again with Explorer highlighted, in the right-pane right click the value NoDriveTypeAutoRun and select Modify from the drop down menu. The base value will be set to Hexadecimal. If not, select Hexadecimal.

Type 95 and click OK.

After running the above processes you can either use the instructions below or try scannibg the USB with MalwareBytes.

Open the Command Prompt by typing ?cmd? in the run box. In the command prompt type the drive letter of the USB drive and press enter . Now type dir /w/a and press enter.

This will display a list of the files in the pen drive. Check whether the following files are there or not

Autorun.inf
Ravmon.exe
New Folder.exe
svchost.exe
Heap41a

or any other exe file which may be suspicious.

If any of the above files are there, then probably the USB drive is infected. In command prompt type attrib -r -a -s -h *.* and press enter. This will remove the Read Only, Archive, System and hidden file attribute from all the files. Now just delete the files using the command del filename. example del Ravmon.exe. Delete all the files that are suspicious. To be on a safer side, just scan the USB drive with an anti virus program to check whether it is free of virus or not. Now remove the drive and plug it again. In most of the cases, the real culprit turns out to be the ?Autorun.inf? file which mostly gets executed when someone clicks Ok in the dialog window which appears above. Thus the infections can spread.

http://www.whoismadhur.com/2008/01/26/how-to-remove-virus-from-usb-drives/

Keep us informed as to your progress if you require further assistance. ;) :D

by vlucinda

recognized in the command prompt or in my anti-virus software. In the command prompt, I tried E: through K: and it said they weren't recognized drives. Only drives C and D appeared in the options for an anti-virus scan. I tried plugging in my empty ipod dock to see if that would help and it didn't. (If I actually put the ipod in, it freezes within seconds.)

by rob miners

Open Device Manager and delete all usb entries by clicking Uninstall, reboot and test.

Run the HP Software Update utility if it is installed. Update all of the items that it picks up, reboot and test .

http://h20180.www2.hp.com/apps/Lookup?h_lang=en&h_cc=us&cc=us&h_page=hpcom&lang=en&h_client=S-A-R163-1&h_query=dv+8000&submit.x=4&submit.y=3

Follow the above link if the software update doesn't work and select your Model. Update all of the drivers.

Keep us informed as to your progress if you require further assistance. ;) :D

by vlucinda

So, it's not at all dependent on the existing USB ports functioning--they can be completely dead and the external port will work?

I will probably get one, even if my current problem is solved, for the reasons you mention above.

by oh smeg

They are different to standard USB Hubs i the fact that they have their own Power Supply and provide 500 Milliamperes at each USB Socket on them.

What most people do not realize is that you can connect up to 128 USB Devices per USB Port with the use of enough USB Hubs. However if even a fair % of those USB Devices get their power from the USB Port you will so run out of power . If on the other hand every USB Device has it's own Power Source then you don't need any extra power to run things. Because this isn't the case they make Powered USB Hubs to help make up for the shortfall from the Power supplied through the USB Ports.

Col

by vlucinda

device manager. No luck. I checked the HP updates page for my model and I didn't see anything that I have missed.

This discussion is closed to new replies.