6 replies
by lamentofking Accepted solution
by rob miners Accepted solution
http://support.dell.com/support/edocs/systems/ins600m/en/sm/hdd.htm#1123687
The Hard Drive will have to be removed from the enclosure.
One like this will suffice.
1. Support PC
2. Use for 2.5? IDE HDD
3. USB 2.0 interface
4. Support Windows 2000, Windows Xp, Windows Me
http://www.mittoni.com.au/usb-20-25-hard-drive-enclosure-p-1221.html
by lamentofking Accepted solution
thanks to both of you guys.
True Blue, tht enclosure seems a bit too pricey. Have you found any ones that are cheaper?
by rob miners Accepted solution
using that as an example. :)
If you look around your area I am sure that you will be able to find something a bit cheaper. :)
by oh smeg Accepted solution
So all you need do is remove the HDD from the carrier by removing the 4 screws that hold the HDD to the Carrier/Mounting Bracket of the NB.
A standard USB Enclosure for any 2.5 inch HDD will suit the drive from this computer so you can use it with NB's that have SATA Drives. As I think that is what your reference to SATA Drives is all about. But if not you [b]Can Not[/b] use a SATA Drive in the Enclosure for the IDE Drive out of the Insperon 600m.
Col
by Former member Accepted solution
http://www.xpcgear.com/enclosures.html
Please post back if you have anymore problems or questions.
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending