Question Locked

USB - pendrive sounds, is recognised but no drive associated

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

In XP, whatever USB device I put in, in any of the 3 ports, XP recognises by sound and in the "Safely Remove Hardware" application, but no drive is ever asociated with it

I have tried removing the battery and replacing it - no effect

Any ideas?

4 replies

by ic-it

Open System Properties, expand the tree view to access Disk Management.
It should be listed there and the drive may be conflicting with another drive letter (mapped drive?). Right click the USB drive and change the drive letter to one un-assigned.

by antgreen

Thanks so much - you know I thought I knew a thing or two about operating systems, but this fix took me about two minutes and I am now enjoying the pen drive again!
Now to see whether the USB modem I got yesterday will work or not.

As to possible causes, it could be that it was the presence of a camera memory stick in another non-USB slot, or else that I had just mapped a LAN drive and was not on the LAN at the time. Neither convince me that much!

Anthony

by older mycroft

The internal battery makes no difference whatsoever, as the usb unit automatically draws power through the cable. Actually best to plug in without a battery installed, in case of a random 'short'.

As above, use Drive Management to attribute a drive letter to the device.

This discussion is closed to new replies.