Are connected to the M'Board.
If they are on a fly lead and connect to a Header Pins on the M'Board they have less power available to them than the ones that are directly soldered to the M'Board or may not even be connected properly if at all.
If they are a direct connection to the M'Board and do not work you need to look at the available power or USB Drivers and maybe the number of Enabled USB ports in BIOS.
Depending on the M'Board maker you can have several different USB Ports in the back of a computer that connect in different ways and some of these particularly the ones on Fly Leads can be disabled in BIOS to preserve power or make the original installation easier as they do not require specialized drivers that are an extra to the Windows Drivers. Sometimes these extra ports are not enabled and fail to work because of this and other times this results from a lack of available power as the M'Board can be over taxed when many USB Devices are connected and sucking power out of the system.
It's also possible that whoever setup the system failed to properly connect extra USB Ports that are on the back of some computers again this is directly related to the M'Board used.
What you need to post is if this Port worked previously and is now no longer working or if this was a new installation that failed to work. The answer for both of the above possibilities is completely different.
Col