Question Locked

USB Printer & USB Wireless Adapter

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,

I have a Sharp AM-400 Laser printer that runs by USB and a DLink DWL-G122 Wireless Adapter. My problem is that just recently whenever the printer is plugged into a USB port (any port, have tried them all) my Wireless adapter fails to be recognised by Windows XP pro. If I leave the printer unplugged the wireless adapter works fine and visa versa if the adapter is unplugged the printer works fine. Also I have noticed that if I leave the printer unplugged, restart the PC, the wireless will connect fine, then I plug my printer in, both will work for a short time then my network neighbourhood conections start to fail and eventually the PC locks up. Strange thing is that even though network neighbourhood fails to recognise other PCs in network the internet will continue to work. Both the internet and the network are run through a LinkSys Wireless ADSL Modem/Router.

I need to share the printer from this PC to my notebook, which is why this is so frustrating at present.

Any sugestions or help would be greatly appreciated.

5 replies

by toks

Hi Derek,

I have a similar problem, but instead of a printer I have an USB mouse. My DWL-G122 was working fine until the day I plugged the USB mouse. Now XP keeps showing a message saying "this device can perform faster" and creates different network adapters. Can't XP handle USB 1.1 and 2.0 devices together? Have you find a solution to your problem?

by kevin.ctech

Hi Derek,

I have the same problem with me tooo. I bought one HP Color laserjet 2600n and I also have a wireless adapter for the desktop. I'm facing the same problem as u are. Were u able to find any solution for this. Pleaseeeee let me know. My emai: kevin.ctech@yahoo.com

Thanks in advance
Kevin

by derekraine

I have found the solution to my own problem and thought I would let others know.
The problem appears to maybe be with the 5V rail of the power supply not being able to supply enough power to all USB devices.

I fixed the problem by purchasing a powered USB HUB and plugging the printer into that. The wireless adapter is still plugged into the PC directly and all appears to be working OK.

Hope this helps you other guys that are experiencing similar problems.

Cheers
Derek

by toks

I still haven't found a solution to my problem. I think the problem is in the adapter DWL-G122, I am sending it to the technical assistance today...

Regards.

This discussion is closed to new replies.