Question Locked

USB to LPT1

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello everyone,

I was wondering if someone could share their knowledge (D-I-Y) on how to convert Parallel Printer Port to USB. thanks

5 replies

by maniacman

I've never heard of wanting to connect a USB printer to a parallel port, even through some media conversion device. If your PC lacks a USB port, then I suggest that you are way overdue for a PC upgrade.

by edward_kosh

Ok This is the deal:

My company has decided that ALL USB support is EVIL. and now we cannot use anything USB. (They disabled all USB ports) so my question is:

Is there anything like a HUB that I can plug USB items into and then plug that hub into either a serial or paralell port? for bypass?

(They have not disabled the serial or parallel ports.)

by thechas

To be brutally honest, you will not save any money with a D-I-Y versus a purchased solution. Even if you place no value on the time to design and assemble an adapter, the parts will cost you as much or more than a commercial solution.

Of course, if you are looking to do something special with a parallel port and not just connect to a printer, the commercial solutions may not work for you. Still, I suspect that you can find a ready made USB option for anything you desire to do.

As to building an adapter, the first question is will it be bi-directional, output only, or support the 1284 parallel printer standard.

The above just guides your hardware choices.

You will need a data buffer and a serial to parallel converter. For full bi-directional, or 1284 support, you will likely need to use an ASIC or similar programmable logic device as the heart of your adapter.

And all of the above is just the start.

Chas

by oh smeg

If you do there are several Adapters available from various makers that are Dirt Cheap easy to install and use.

It wouldn't be worth the Time and Effort in even starting to work out what is required in the way of components to build this circuit let alone even start to assemble the parts or mark out a Bread Board.

Col

This discussion is closed to new replies.