Discussion Locked

Utilization of Memory and network

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have Netware 4.2 Small buisness for internetware installed.
users are finding difficult in accessing files through client PC.
I would like to check for utilization of memory
in my local server.
How can i check how much memory is being utilised by my server
in order to know whether it is memory related problem or network problem, how i can troubleshoot
this problem
kindly help me out, urgently.
regard
akhtar

3 replies

by pgm554

For that particular issue ,look at cache buffer setting.

As a rough guideline, if the amount of cache buffers (checked from MONITOR.NLM, Resource utilization) drops below 40%, more memory should be added to the file server. This percentage rule has been commonly used for many years when the average system had 16MB to 32MB, and most systems nowadays have more cache buffers (in terms of percentage) available. An example is that 40% of 32MB is 12 MB, while 40% of 1024MB is 409 MB.

In most cases, impact to performance can be seen when the amount of cache buffers drops below 40%. The percentage value is calculated from having total cache buffers divided by the original cache buffers. The total cache buffers and original cache buffers can be found at the General Information screen of the MONITOR.NLM. Please refer to the March 1997 AppNotes on Optimizing IntranetWare Server Memory.

This discussion is closed to new replies.