7 replies
by dj3323 Accepted solution
by larryd4 Accepted solution
Their is a point during boot up that your PC asks if you want enter setup by pressing a key. Usually delete or an F key.
Within your BIOS you will have the option to turn off the onboard video or you will have a switch that will prioritize you video card which should be set to PCI.
by jamesrl Accepted solution
Normally you would bring up the BIOS and change the video there from integrated to PCI/AGP/PCI Express, save and exit reconnect to the new card and reboot. In other words you have to have video to change video.
Some MBs will automatically switch if they sense a video card in the video card slot. But you might still run into problems if you didn't already install the drivers. What to do to be sure, is try to boot in safe mode. Boot the machine and press F8 to get into the menu which allows you to chose safe mode. If that works then you can add the nVidia drivers from CD or download them from the net.
James
by dj3323 Accepted solution
by msillers Accepted solution
by steff16 Accepted solution
that should run the card with the default drives of the card if that dosent work the its VERY likely you have fried your motherboard onboared video are tempermental and if your a new pc builder its possible you have electro shocked your board there for the chip set is fried it will start the cpu fan will spin but the board isnt working
T.J. Minter
by steff16 Accepted solution
id sugest fries for a good cheap board a gigabyte will do you just fine
you can get one for say 50 dollars
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending