13 replies
by bhunt
switches are stupid.
routers tell the packets where to go.
The basic setup process goes like this.
1.Internet
2.Router
3.Patch Panel
4.Switch
5.Computing Device
All Traffic goes to the router, even if it doesn't leave the network.
If the router isn't VISTA Compatible then you are going to have problems in your environment.
by bhunt
I am having the same exact problem (Vista Business can not keep a connection with Exchange 2003 - instable). I can recover the connection by cancelling the server request (from Outlook2007), after which it recovers.
someone suggested this is a router problem? I dont see how that could be. I have the same problem with my home network access (Linksys router) and office (many Cisco routers).
by nimmo
First up I would check the cabling and make sure the RJ45 connectors are properly secured to the ethernet cable.
As for using a router that all depends on your network setup. Some people will have their exchange server on a different subnet which is when you will need to use a router but when its on the same subnet you can use a switch to forward the packets.
Try resolving the exchange server by hostname and IP.
You can also try flushing the ARP cache using the "arp -d *" you may have some how poisioned your arp table also flush dns "ipconfig /flushdns" while your at it.
by armstrongb
A bold new way to stem the flow of spam and social engineering done in a way that assures Exchange will never be over run or congested by the 'secure by design' Vista boxes....(with tongue firmly in cheek.)
But seriously, all you really need to do is upgrade all your servers and PCs to the latest MS OS and Office 2007, as my MS TAM (technical account manager) explained to me, and then it will all work just fine. (She really said this to me as I laughed her off the phone. She also denied the existence of macro virus for most the 1990's so I don't believe a word she says)
by curlergirl
by lbrent
No they are not. Hubs are stupid, switches are smart. Managed and most unmanaged switches do have routing tables for data traffic. It's what switches do.
Routers route traffic through different networks. You would not use a router in this scenario since he isn't even looking at the outside world. He is staying in his subnet.
And Vista compatible router? That's a joke, isn't it. Unless you are running an IP6 network, you don't need a special router.
by f.x.flinn
by dumphrey
it is for sure an issue with Vista, all Xp, Mac, and Linux clients are buisness as usual, its just the three Vista clients that loose connection. Its a layer two or three issue, as no traffic can get through at all durring the "outages", it as if the wire has been cut, but it comes and goes. XP clients pluged into the same port, using the same patch cable have no issues, Just Vista.
I am about to test the idea its related to the Cisco Catalys 4008 at our core. If thats the issue, we will have to route traffic differently for those three clients, or replace the catalyst.
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending