Question Locked

Vista - Issue making programs connect to the internet.

0 helpful
20 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have looked everywhere for a solution so I thought I should probably ask about it. My laptop is connecting to my Home network wirelessly. I have the internet working through the browser, however applications wont connect. My AVG 8 cannot connect to the update server to update, Steam cannot connect, also the world of warcraft client cannot connect.

I thought this could be a firewall issue and I've turned off Windows Firewall to try and see if that was causing a conflict however that wasn't it.

MSN will work however, UAC is turned off, I can browse the internet fine. It has a dynamic IP address, like my desktop. My desktop has no issues with any connections, all services run fine.

I'm using Vista Home- Premium on both machines.
Is there some underlying security feature running on my Laptop? It is with the latest updates just like my desktop.

Any help would be appreciated thanks!

20 replies

by rob miners

Inactive components and/or blocked internet connection after update to 8.0.196

http://www.avg.com/support

Keep us informed as to your progress if you require further assistance. ;) :D

by spartan117

Thanks however,
I did manualy update AVG 8, and tried steps in support however its still not working.

The AVG is just one of the few problems I'm having, maybe there is something thats affecting everything that I'm just not seeing.

As multiple applications are affected.

by rob miners

as it may give you internet access.

Follow the steps below with the System started and restarted in Safe Mode with Networking. Running in Safe Mode loads a minimal set of drivers for the Operating System. You can use these options to start Windows so that you can modify the registry or load or remove drivers.

Removing malware from System Restore points
To remove the malware, you must first disable System Restore, then scan the system with up-to-date antivirus software - allowing it to clean, delete, or quarantine any viruses found. After the system has been disinfected, you may then re-enable System Restore. The steps for disabling System Restore vary, depending on whether the default Start Menu or the Classic Start Menu is being used.

Default Start Menu XP
If using the default Start Menu, click Start | Control Panel | Performance and Maintenance | System. Select the System Restore tab and check "Turn off System Restore".

Classic Start Menu XP
If using the Classic Start Menu, click Start | Settings | Control Panel and double-click the System icon. Select the System Restore tab and check "Turn off System Restore".

Vista
Start, right mouse click Computer and select Properties. Select Advanced System Properties, click contine and then System Protection. Untick the box nect to Local Disk C: and click on Turn System Restore off.

After scanning the system and removing the offending malware, re-enable System Restore by repeating the steps, this time removing the check from "Turn off System Restore".

Download Malwarebytes Anti-Malware, install it and update it.

Malwarebytes

* Double-click mbam-setup.exe and follow the prompts to install the program.
* At the end, be sure a checkmark is placed next to Update Malwarebytes' Anti-Malware and Launch Malwarebytes' Anti-Malware, then click Finish.
* If an update is found, it will download and install the latest version.
* Once the program has loaded, select Perform Quick Scan, then click Scan.
* When the scan is complete, click OK, then Show Results to view the results.
* Be sure that everything is checked, and click Remove Selected.

If you encounter any problems while downloading the updates, manually download them from here and just double-click on mbam-rules.exe to install.
mbam-rules

I would keep scanning with it until it is clean by closing out and rebooting and running it again.

From another PC download and install Spybot, update it and copy the the installed folders to a USB Stick.

Restart the PC in Safe Mode, navigate to the USB stick and run Spybot.

Download Spybot - Search & Destroy and install it. Update it. http://www.safer-networking.org/en/download/index.html

With the new strains of Virus that have been created you may find it necessary to rename the executable files so that they will work. Rename mbam-setup.exe and then navigate to the install folder and rename mbam.exe. Do not change the files extension from .exe. Do the same with Spybot.

Also run this Rootkit Revealer GMer
Gmer

FAQ
FAQ

BleepingComputer
bleepingcomputer

How to check the Host file

Step 1: Click the Start button and select Run. Now type the following text in that Run box and press Enter:

notepad c:\WINDOWS\system32\drivers\etc\hosts

Step 2: You will see a new notepad window on your screen containing some information. You should have a single entry of 127.0.0.1 localhost. If there are any other entries in there it means that those sites are being blocked and it is probably due to an infection. Unless you made the extra entries delete them all but 127.0.0.1 localhost.

If it is the DNS changer fixwareout will remove this.

Fixwareout

The DNSChanger trojan is usually a small file (about 1.5 kilobytes) that is designed to change the 'NameServer' Registry key value to a custom IP address. This IP address is usually encrypted in the body of a trojan. As a result of this change a victim's computer will contact the newly assigned DNS server to resolve names of different webservers. And some of the resolved names will not point to legitimate websites - they will point to fake websites that look like real ones, but are created to steal sensitive information (like credit card numbers, logins and passwords).

VARIANT: Trojan.Win32.DNSChanger.al

Update your Antivirus software.

If TaskManager has been disabled this will enable TaskManager to allow access to the Registry.

Command line removal
Click Start Run and type cmd and then press Enter.

Execute the following commands in the command line in order to activate the registry editor and Task Manager: answer ?y? and press Enter.

reg delete HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\System /v DisableTaskMgr

reg delete HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\System /v DisableRegistryTools

Just to be on the safe side when you finish do an online scan with Bitdefender. Or Google for an online scanner.

bitdefender

by spartan117

Still not working, I also tried using Ethernet cable instead, with the same problems , any other ideas?

by seanferd

You may need to do some port forwarding per-app. See your router manual and
http://portforward.com/

(You don't need to buy the convenience-software, just see the instructions and use the test page.)

by spartan117

I've tried the winsock reset, but with the special apps for the router, It doesn't make sense to me why there should be a special apps set up in the router, when my desktop PC allready can access all of the same applications no problems.

I connected my laptop the same way as my desktop with an ethernet cable, and i'm having issues still where the desktop, on the same network isn't.

I thought it could have been a issue with the wireless or port forwarding but ive eliminated both out i think.

I'm not sure whats next now!

by seanferd

If the router has a firewall, you will need to forward ports on the router to let the programs talk to the internet.

If this is the problem, it is not a Windows issue, it is a router issue, and nothing you do in Windows will affect it. You need to access the router setup program.

by spartan117

Given Administrator rights, new account still having the same issues.

by rob miners

Click Start, Control Panel, Network and Sharing center, Manage network connections and right click Local area connection and select properties. Untick the box next to Internet Protocol Version 6 (TCP/IPv6) and see if you can connect.

See if there is anything in here.

http://www.chicagotech.net/vista/vistaieissues.htm

by spartan117

And also looked through that website but couldn't find anything specific to my problem.
Still wont work for some reason.

Its like I have a proxy set up but I don't.

Just dont understand why my browser works fine but applications requiring the internet will not connect. AVG , Steam, WoW, now Warhammer patch wont wont connect.

by spartan117

Is disabled, I've tried enabling it and allowing the programs, then again disabling it.

I don't have a software firewall from a 3rd party either.

So I'm not sure. I'm debating if I should reformat my laptop.

by rob miners

backed up it wont take long. Try this first.

Open a command prompt

Type the following commands

Ipconfig /flushdns and press Enter.

Netsh int ip reset and press Enter

Vista will then want to be rebooted. Reboot.

Type netsh winsock reset at the command prompt, and then press ENTER.

by spartan117

PC also? If my desktop is running the same applications fine, would I still need to open/forward ports to the laptop/

by seanferd

I do have to do that on mine. This is so you can allow or prohibit activity depending on the connected computer. It's for network/user control, and network security.

by older mycroft

It wouldn't happen to have an armoured motherboard by any chance, would it ?

My tower had an armoured motherboard that I had to turn off - maybe it can happen with some laptops too ??

It wasn't a 3rd party software firewall - it was a hardware firewall built into the motherboard itself. ;)

This discussion is closed to new replies.