Question Locked

Vista networking

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a desktop running Vista connected to a laptop running xp through a wireless router. How do I set up a network so these computers can see each other? I would like to transfer files between the 2.

12 replies

by p.j.hutchison

1. Make sure both machines are in the same network.
2. MAke sure you have same username and password on bother PCs.
3. Make sure you have allowed 'File and Print Sharing' in Exceptions in Firewall settings for network connections.
4. Share the folders and set appropiate permissions.

by sgw1973

I have two laptops running on Vista (Home Premium) and XP Professional, both are connected to the same wireless network. I am not able to make these two laptops talk to each other. I am trying to access XP machine from Vista machine trough remote desktop connection. Any help will be greatly appreciated.

by jenny

Make sure you have the file sharing turned on both machines and they are in the same workgroup.

Next, make sure that you have the right permission assigned for the folder so you will not have problems accessing the files.

Go to the Vista machine, and you should be able to browse the network and find the shared folder, otherwise, you can map a network drive.

This is very high level, if you need detailed info, email me.

by p.j.hutchison

If the firewall is enabled, then make sure that you add 'File and Print Sharing' and 'Remote Desktop' are added to the Exclustions list (they are not enabled by default - as they are insecure protocols).
Also, if failing to ping between machines, make sure ICMP is enabled as well.

by sgw1973

Thanks Jenny for your immediate response. Since my XP laptop is from my office it is connected to a domain, but the other laptop (Vista) is connected to a WORKGROUP. I am able to see the XP machine in the network map after I installed LLTD on my XP laptop. The issue is XP machine in ready-only (meaning no link to connect) in the network map. I want to get this working very badly... any help will be greatly appreciated...

by computercookie

What is the "Workgroup" name on all the computers.

Do you know how to find it?

by sgw1973

Go to my computer->right click and select properties->you will find it in the properties window

by computercookie

Click Start > Control Panel > System
Click on computer name tab, it will tel you the computer name and workgroup name, the computer name has to be different and the workgroup name has to be the same on the 3 computers.

All workgroup names are in caps only, no spaces, most people just use WORKGROUP or MSHOME, you can try and be more inventive if you want, can't remember what character aren't allowed.

by sgw1973

Hello Hutchison,

Actually firewall is turned off in Vista machine. I had another Dell laptop (XP) earlier, with that I was able to connect to my office laptop. So, I think the problem is with some settings in my Vista machine

by p.j.hutchison

Is File and Print sharing enabled on the router?
I do not think it matters whether one machine is in a domain and the other is in a workgroup.

What happens when you type \\computername in Start, run? Do you get a list of shares, printer, sch. tasks or an error?

by sgw1973

I am unable to ping these two laptops, both way (Vista -> XP or XP -> Vista). When I do \\ipadress, I get network path not found error (0x80070035)

This discussion is closed to new replies.