Question Locked

vista pc added to xp network can't find xp connected printer .... :(

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I just added a Vista laptop to my home network. All other machines in the network are running XP. 2 are wired and up to 4 connect via WiFi. With the exception of the Vista machine, all the other machines see and share as they should. The Vista sees and connects to the router and internet but is blind to everything else. Sharing is on and so is discovery. The Vista help doesn't suggest anything beyond those settings. I can do a XP machine almost with my eyes closed, but this Vista is another matter. All I can say is "What were they thinking?" Everything is harder and slower to get through with Vista. And it being a new machine, I don't want to fudge the warranty by downgrading to XP.

Any help would be appreciated.

Thanks ! ! !

11 replies

by Former member

I had this happen to me, iam still going through the connections to find a solution. What i have done (in the mean time) is buy a external harddrive that has a printer server in. Buffalo is a good one that i have at the moment. When attached all xp and vista machines can see the printer which does me for the moment. Still be able to print while trying to find the solution. Please post back if you have anymore problems or questions.

by Former member

I have added a link here for you to load on this "LLTD", but read the instructions below first.

This package contains the Link Layer Topology Discovery (LLTD) responder. The network map on a computer running Windows Vista shows a graphical view of the computers and devices on your network and how they are connected by using the LLTD protocol. The LLTD responder must be installed on a computer running Windows XP before it can be detected and appear on the network map. After you install this item, you may have to restart your computer.
http://www.microsoft.com/downloads/details.aspx?FamilyId=4F01A31D-EE46-481E-BA11-37F485FA34EA&displaylang=en

Please post back if you have anymore problems or questions.

by beckumsca

You guys gave me some good info and now the Vista laptop can see other machines in the network when I have it show me the full map of the network. In the "managing network" page, only the Vista machine is listed. And there I still can't see any other machines or the printer. The printer is attached to the network through a XP machine and not via a print server.

The part I don't get is that all the other machines see the printer fine .... Vista on the other hand is another thing. I don't know, maybe MS decided that Vista should be the top dog in the home network world and everything should go through it. I really didn't want to have to buy a print server for a home network. But now, because of this issue, it looks like I might have no other choice because I don't want to have to move files from one machine to another just to print them.

Gee ...... Thanks MicroSoft ! :(

by beckumsca

And so you know .... I only found the fix and then copied and pasted it here.

This came from redondo77 on the MicroSoft forums. He is the one to thank!

I'm posting here the 5 major steps I went through to get my Vista-WinXP network running seamlessly. If you are having problems with yours, perhaps one or more of the below 5 steps will do the trick. Step 5 was the most obscure - changing a registry setting in one of my WinXP machines so that my Vista pc could see its shared folders.

Windows Networking ? Vista and WinXP

Ok. First take a deep breath and gather your patience. I wrote-up the below thread after my recent experience in networking a new Vista laptop with two existing WinXP machines. It wasn't quick but it did work, eventually. Try some of these steps:

1) Firewall settings - one of the biggest hassles. To get started I suggest you FIRST disconnect your network from the internet (for your protection), then disable ALL firewalls (including Windows firewall) on ALL machines, and then work to get your home network operating internally. What I learned on my home network is below.

1.1) My WinXP machines have ZoneAlarm and I needed to ensure that all machines on the network were in the trusted zone. Go to the Zone tab of Firewall settings in ZoneAlarm free version. Ensure all of your machines? IP addresses are listed, as well as that of your router or wireless access point.

1.2) My Vista laptop came loaded with Norton Internet Security. Go to Norton Internet Security tab, open settings, scroll to bottom, open internet security and firewall options, open advanced settings, open configure, change default inbound NetBIOS, inbound NetBIOS name, and Block Windows File Sharing to ALLOW. Configuring this beast of an app required a lot of trial, error and googling the Symantec site and others.

2) Ensure sharing is enabled on all machines. It is quite different for Vista vs WinXP. The procedure is fairly straightforward and is well documented on the MS site and elsewhere. In Network and Sharing Center it is critical on Vista machine that you have your network configured as Private and that the Sharing and Discovery Settings are set to ON except for Password Protected Sharing.

Link for Vista: http://www.microsoft.com/technet/network/evaluate/vista_fp.mspx

Link for WinXP: http://www.microsoft.com/downloads/details.aspx?familyid=FD7FD48D-6B4A-448E-A632-076F98A351A2&displaylang=en

3) Workgroup name. Ensure you are using the same workgroup name on all machines. WinXP and Vista machines have different default workgroup names.

WinXP: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/windows_network_changename.mspx?mfr=true

Vista: http://windowshelp.microsoft.com/Windows/en-US/Help/5723d061-b884-40da-b5e7-94a55f6fcead1033.mspx

and

http://windowshelp.microsoft.com/Windows/en-US/Help/baab4f1a-2461-482d-bb2e-c996a197e35f1033.mspx

4) Download and install Link Layer Topology Discovery (LLTD) onto the WinXP machines. Just a nicety, this enables the network map in Vista to show all machines on the network.

http://www.microsoft.com/downloads/details.aspx?FamilyID=4f01a31d-ee46-481e-ba11-37f485fa34ea&DisplayLang=en

5) And the final step: check the registry on your WinXP machine per MS article 913628 that I found by searching MS for "error message when you try to access a Windows XP-based network computer: "You might not have permission to use this network resource". See the article at: http://support.microsoft.com/kb/913628. This finally did the trick for my network.

Keep pounding away at it. It will eventually be worth it. It took me almost a week to get everything working right.

Best of luck to you ?

by seanferd

Vista can be a bear with networking for the home user. Matching user accounts, LLTD, and firewall settings are the most overlooked issues with this, it seems.

Thanks for mentioning redondo77. I remember that name, it has come up before in other forums where other people were having similar problems. I think I will need to collect all my links and info again for a comprehensive Vista networking reference!

by beckumsca

Once I changed the setting in Norton, I was given access to everything in the network. I could see all the other computers, event the ones I didn't run the patch on. I understand that Vista and Norton are trying to protect the user from being taken over ..... But not all of use need that level of either protection or coddling.

I spent a week trying to figure this thing out and almost down graded Windows because of this issue. Both Windows and Norton should have more inclusive help information available. Esp.. seeing as the Norton was preinstalled on my 'puter.

Thanks to all of you for the help! And keep up the great work!

by seanferd

Not everyone takes the time to do that. It benefits so many others having similar problems.

There have been so many networking problems with Vista, especially for home users. While information is out there, it seems that it is getting to the point where there is too much for people to wade through to find the answers that apply their situation.

Again, thanks for posting back with your hints. Hope your network keeps running smoothly!

This discussion is closed to new replies.