Question Locked

Vista wireless problem using non-Broadcast SSID

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I'm unable to connect to the wireless network if I don't broadcast my SSID. It works fine under multiple XP laptops using Open WEP. Once I enable SSID broadcasting Vista connects fine and I can disable broadcasting again. The connection is maintained until I restart Vista. I stop SSID broadcasting as one of many security measurements.

Clues anyone?

7 replies

by hal 9000

On the M$ Vista User Group if there is an easy work around they will know of it or they will need to incorporate a fix at some latter time so you really need to involve yourself with M$ on this one. The Vista Users Group Home Page is available here

http://tinyurl.com/yt8adb

Col

by splaktar

I've been having this same problem, but it's not only with broadcasting the SSID. It also appears to have something to do with using a WEP key. It doesn't work well with 64 bit, and it doesn't work at all with 128 bit keys. I've been searching for clues all over the net, but haven't managed to find an answer yet.

by nclinch

Go to control panel > Network and Sharing Center. Click on Manage Wireless networks. If your connection is already listed right click on it and go to properties if not add it by hittiung the "+".

Once you are in the properties check the checkbox named "Connect even if the network is not broadcasting"... then your problems will be over

by splaktar

Yep, I did try that and found that it appeared to work for a short time. But I couldn't get it to keep working like that. I finally just had to broadcast the SSID.

I also had to change from WEP to WPA-PSK to get a reliable secure wireless signal. There are some nice guides online for configuring WPA-PSK. My 3rd party networking programs did not support PSK strings, but the default wireless tools for XP and Vista did.

by sales

I knew about that "connect even if not broadcasting" check box and checking it has no effect... I can only connect to my Belkin access point from this one Vista machine if I broadcast the SSID. If I connect and then turn the SSID broadcast off it stays connected for that session but then reverts to listing the network as an "un-named secured network" in the list next time I turn the machine on. We've got 3 other different XP machines that all happily connect reliably to the station when its SSID is hidden.

I'm using WPA-PSK with AES and MAC filtering.

by jjustice

http://support.microsoft.com/kb/929661

per Microsoft

"We recommend that you do not configure access points as non-broadcast (hidden) networks. If you have to connect to a non-broadcast network, we recommend that you do not use the automatic connection option. The automatic connection option discloses the Service Set Identifier (SSID) of the network, even when it is not in range.
"

This discussion is closed to new replies.