Question Locked

VLAN IP Setup on Access Point

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have 2 vlans configured on the 3560 switch. Vlan2 needs to go back to vlan 1 to get an ip address from the dhcp server. I entered the ip helper-address command and all is good but it still doesn't grab an IP address. Thats the first problem. The second problem is I did the same on a wireless ap and I need it to get an ip and route to the internet.

2 replies

by cg it

got a router in there to perform 802.1Q trunking

yu can trunk between switches designating a trunk port on one of the switch ports but still, ought to have a layer 3 device.

This discussion is closed to new replies.