Question Locked

VPN cannot aquire network address...

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello,

Okay, here's the problem. My wife downloaded vpn software from her university. First, the vpn adapter is always set to disabled. When I enable it and attempt to connect, it can't aquire the network address. If I disable my other LAN (zoomtown), vpn fails to connect giving a 429 error code. What to do?

TIA

3 replies

by w2ktechman

works with having an Internet connection, disabling the LAN will give a connection error.
VPN Adapter? Is this a different LAN card? The VPN SW should use whichever connection to the Internet that is available, and should not require a different adapter.
I will make a few assumptions here, 1st, you are using a different NIC (network card) to try the VPN. If this is the case, you need to install it, and get it working on your network before you can VPN.
OR
you have a wireless adapter that you want to use with the VPN. You will need to setup the wireless connection properly. test that you have an Internet connection, and then use the VPN.

by alanobrien

If your VPN is a cisco client, then this is what error 429 means,

Reason 429 Unknown Severe Error Occurred at Peer. Check the peer logs for details

If not, have you checked the Manufactures site for error codes?

Do you have an error id in your event logs(for when you try to connect) that you can post as well?

Have you uninstalled the client and re-installed it?

Have you had any trouble getting onto the internet in general

do you have a second vpn client installed (zoomtown)?, if so this could be conflicting

is your firewall configured to let vpn traffic in and out?

These are just a few questions to get us started. If you can answer these we should have a clearer picture of whats happening.

This discussion is closed to new replies.