6 replies
The answer is quite simple, your home network is using the entire 192.168.0 subnet. This means that when you make your request your pc thinks that the address is on the internal network at home and so does not route you out to the VPN.
You could use route add, to direct your traffic to the VPN ip,but when you add the route, do not enter any details for the metric or the interface and also direct the traffic at 192.168.140.0, not the specific ip.
Also you could change your home IP range to 192.168.250.0, I have had to do this on other customer sites due to conflicting ip ranges.
Mike aka Riverdale
by jarod.curtis
The router is a linksys and the network is hard coded as 192.168.1. and it cant be changed. I tried the route add 192.168.250.0 10.0.0.1 and it didnt work either
by jarod.curtis
I have tried to do the route add 192.168.140.0 10.0.0.1
and it doenst work i also have a linksys router and the 192.168. is hard coded on the settings... ??
by jarod.curtis
by jarod.curtis
by dhouchin
You have (at least) two separate Private networks at your work: 10.0.0.0/8 and 192.168.140.0/24. You also have a public IP that is accessible from the internet.
When you connect to the VPN, you are connecting to the public IP address. You then either use DHCP or you have manually configured an IP address for your VPN network connection. Since you're using 10.0.0.1 as the default gateway, you're probably using a 10.0.0.x address for your VPN connection. Use ipconfig to check the address of your VPN connection.
Assuming that 192.168.140.2 is available from your 10.0.0.0 LAN (ie that there is a route defined for it at 10.0.0.1), and assuming that your VPN router/server is configured to route VPN connections, and assuming that there is no firewall that is blocking the traffic, you should be able to access it.
Verify all of those assumptions an you should find your problem.
Changing the ip of your router or local network interface on your system won't help much if the 10.0.0.1 router does not know how to get packets to 192.168.140.2, and if the packets get stopped by a firewall before they make it up to the application layer, then you won't have communication.
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending