1 reply
by cg it
well since the host is using the router for a firewall, to get to the host, port fowarding has to be used. To use port fowarding in the Linksys router, a static IP address scheme has to be used for the host[can't use the router's DHCP to assign IP addresses to clients]. One way to set this up is to have two Linksys BEFSX41 VPN Endpoint routers[one at the host, one at the clients] and create a VPN Windows IpSpec connection via the routers. Very secure connection as authentication is by the routers and not clients.
Routers, thought they say they allow PPTP and L2TP pass through really don't as port fowarding is required to get those packets to the right computer connected to the router. So if the host is IP address 192.168.1.10 a portfowarding rule has to be created to foward PPTP TCP/IP port 1723 traffic to 192.168.1.10. Same with L2TP traffic. Further, there seems to be a problem with GRE traffic being blocked which causes problems with remote access to a host behind the router that continues even if you create a fowarder for port 47 traffic.
I've yet to resolve the problem except when I put a server on the active DMZ port. Problem goes away completely.
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending