Discussion Locked

W98 PC fails to locate DHCP IP Address

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I know this has been ased quite often by others but i still have no rsolution to the problem. I currently has an NT network with 48 WIN98 client machines. I can originally set up the clients to function under DHCP but after a period of time many clients start to drop off the network and will not renew their addresses. If i assign a static ip sddress the clients log on fine. Is this a WIN98 feature(sarcasm)????? Please help.

9 replies

by bv2

A lame answer, I know, but is your DHCP server set up to automatically issue a new IP address when the previous one expires? It sounds like your problem is more server side based than workstation based.

by dheupel

Definitely look into whether or not your DHCP service on your server is renewing leases on expired IP address. If not, you will eventually run out of available IP addresses in the range.

Also, flush your WINS database so the machines will reregister their DHCP addresses on the next boot-up. Usually the reason DHCP leases are not renewed to the same or different clients is because there are duplicate (and therefore conflicting) entries in the WINS database.

Good luck.

by nettek

My guess is that the problem is on the server side. Check the following:

1. Make sure you have the latest SP installed. Each new SP has additional DHCP fixes.

2. On the DHCP server, go to Network Neighborhood Properties -> Protocol tab -> TCP/IP Properties -> DHCP Relay tab. Make sure that the there are no IP addresses listed under the DHCP relay tab (DHCP relay is an option available under NT server regardless if it is running as a DHCP server).If there are, your DHCP server could be trying to send lease renewal requests from the clients to another DHCP server, instead of responding to the client.

3. Make sure you do not have DHCP server running on another server on your subnet.

4. Some ethernet switches can cause this problem if the spanning key algorithm is enabled. You may have to contact your switch manufacturer to tell you how to disable it.

by paul dyball

yes actually we had another program called wingate running a dhcp server - was a default setting. turned it off and she seems to be mighty happy now. thanks for your suggestions.

by moros

I'm not very sure if this has been mentioned or not, but you might also try releasing all the old ips. That is, if the win 98 machines were shut down, then re-booted and got a new ip, but the lease hasn't expired on the old ip you could run out of ips to give out. Try releasing the old ips, maybe make the lease shorter.

This discussion is closed to new replies.