Question Locked

Want a better processor...

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have had my computer for a while now, and most of the hardware that was once top of the line is now bare-bone. I currently have a pentium 4, which, by most standards is outdated. I was hoping to upgrade to a core 2 duo, but i don't want to see what would happen to my motherboard. I was simply wondering if anyone knew the cheapest motherboard that can support a Core 2 duo processor. Thanks.

7 replies

by .martin.

any motherboard will work with a Core 2 duo, as long as it has an LGA775 Socket.

by wanttocancel

You can do price comparisons and find what mobo fits your budget.

by oh smeg

Is this what you are looking for?

They have On Board Video Steal some of the System Ram to Drive the Video and are generally slow junk. If you use one of these you get exactly what you pay for a pile of Junk that isn't worth the money you have wasted.

If you want to use a Core Duo you need a M'Board that has a P43 or P45 Intel Chip Set a PCIE Video Slot and the correctly configured Dual Chanel RAM Fitted. Anything less will be too slow and a waster of your money.

Col

by thechas

Keep in mind that when you switch your motherboard, many of the other devices in your system may not work with the new motherboard.

With a Pentium 4 system, we can presume the following about your existing system:

RAM: SDRAM or DDR
You will need DDR II for any new motherboard.

Video: If a plug in card, odds are it is an AGP card. Perhaps just a 4X.
Most new motherboards only support PCIe for video. PCIe 16X is common for video cards now.

Drives: I suspect that all of your drives are EIDE drives with perhaps 2 IDE cables connected up to 2 different IDE ports.
Most new motherboards have SATA ports for hard drives and optical drives. A few have a single 40 pin EIDE connector on them.

Power Supply: There is a fair chance that you have a 20 pin power connector with the extra 4 pin 12 volt power connection.
Most new motherboards require a 24 pin power connector AND the 4 pin 12 volt power connector.

So, look over the motherboard choices closely. Make sure to add to your budget any other parts you will need to replace.

When I upgraded from an AMD Socket A to a AM2 series processor. (Similar to your change from a P4 to a dual-core.) The only way I could keep any of my existing drives was to install a PCI IDE controller card. I had planned for that and searched out a motherboard with legacy PCI slots so I could use my old sound card and the IDE controller and still have a spare slot should I ever need it.

Just to list what I had to replace / add to my system when I changed my motherboard:

New RAM
New Power Supply
New PCIe 16X video card
New SATA hard drive
New PCI IDE controller card (for legacy IDE hard drives and optical drives)

For mail order, I like Newegg and Geeks.com

Just stick with name brands and avoid the real cheap no name brands.

You list Big Rapids as your location. Not many options for parts stores nearby.

There is PC Outlet in Cadillac or GPC computers in Grand Rapids.

PC Outlet does deal in some used parts.

GPC offers consignment sales and may have some nearly new boards and parts on hand.

Chas

by delbertpgh

There's no happy outcome. Everything got faster over the years: busses, hard disks, RAM, DVD drives, as well as processors. There's little you can plug into an old motherboard that will give you more than an incremental increase in speed; so, you need a new motherboard. That will be held back if you don't get faster RAM, and likely more of it, too. Your IDE disk is likely to be slow and cramped compared to the fast and spacious SATA drives you can get today for cheap ($70 for a 500 GB is typical in mail order.) Pretty soon you're replacing so much, you might as well just buy a whole new box; you'll save money.

If you're lucky, you can take all the parts out of the new case and replace everthing in Ol' Betsy, and sell the old innards on Craigslist. That is, if it fits, and you don't break anything along the way.

This discussion is closed to new replies.