Discussion Locked

WDM Sound Not Working

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi there,
I have a strange problem with sound in Windows XP. All the system sounds are not played anymore and the volume control icon in the taskbar is gone.
However, sound is working fine with Winamp or Media Player Classic etc. I think it's the directx interface that does work but I'm not sure which other methods Windows uses to play sound and how to troubleshoot them.
I guess it has something to do with the WDM engine but un/reinstalling the sound card (NVidia NForce chip ver 5.1) drivers had no effect.
In the Control Panel|Multimedia|Audio tab the MIDI device and in the Voice tab the Playback device is not set up and whatever settings I change in there is not saved and in the Sound tab the Play button is disabled.
Any idea? Please help!
Many thanks!
Silvio

12 replies

by bowzzer

Dxdiag shows no errors, sound device type is WDM and all looks ok. I reduced the hardware accelleration and tried, rebooted, tried again, increased again, tried, rebooted again -- all without any effect.
I searched for NVidia WDM drivers but could not find anything useful, yet.
How can I get completely rid of any sound-related driver files so that I could start over from scratch?
Please help, I don't know what else to do and I can't use the system restore either because it's been disabled...

by rewrite

Try going into Device Manger and uninstalling the sound card. After that, click on Refresh and let the system find the sound card back and reinstall it and all of its drivers.

Cheers.

RW

by bowzzer

I think I mentioned that I already tried that...with no effect.
Thanks anyway!
Any other ideas?

by glyall

have you checked the Sound and Audio Devices properties?
Check if Devise volume setting for Mute and Place volume icon in the taskbar.
If Mute is checked then you have no sould.

hope this helps
good luck

by glyall

if that works open the Volume controls back right clicking on the sound icon and Open Volume controls
check if mute is check on any setting, unmute them if they are.

by dustyd

For some reason, I was having the same problem after going to SP2. Your motherboard maker should have sound drivers available to download.

If like my Asus, they use SoundMax, also look in Services for the SoundMax agent, check to see that it is present in the path it is looking in.

Uninstall drivers, then reboot and point the installation to your download.

by dustyd

For some reason, I was having the same problem after going to SP2. Your motherboard maker should have sound drivers available to download.

If like my Asus, they use SoundMax, also look in Services for the SoundMax agent, check to see that it is present in the path it is looking in.

Uninstall drivers, then reboot and point the installation to your download.

by rcom

Check System group in Device Manager and see if you see an entry called "Plug and Play Software Enumerator." If missing here's how to reinstall it: You'll need to find two files (try doing a Google Search) #1. swenum.inf #2. swenum.sys Then Add New Hardware, System Device, and have disk. Choose swenum. Install it. Reboot. Voila. It should be fixed.

Again, these are instructions on how to install the Plug and Play Software Enumerator in XP/2k -- if it is missing. If it isn't missing and works then this wouldn't be the cause of your audio problem. If you had problems with the previous instructions, here they are again. I presume swenum.inf is a Win9X/ME only file. The machine.inf solution should work for 2000 and XP. If you can't find or see the files it may be because your explorer isn't configured to show system or hidden files -- check your options or use a cmd prompt. From an MSDOS cmd prompt type or cut and paste md \temp cd \temp copy %windir%\inf\machine.inf \temp\allmachine.inf copy %windir%\system32\drivers\swenum.sys \temp copy %windir%\system32\streamci.dll \temp notepad \temp\allmachine.inf Using notepad go to line 22 (CTRL-G 22) which should be ExcludeFromSelect=* delete and remove that line wherever you find it (Line 20 maybe) and save the file We're finished that part. Notepad and the cmd prompt can be closed. %windir% was probably c:\windows\ and that was automatically be expanded in the windows cmd prompt. Now, just go to Add Hardware, add a new hardware device there at the bottom, install from list, next, have disk, and select the temp directory where we copied the files (c:\temp\ in the example here). You should have all the different machine level services listed since we've removed the ExcludeFromSelect=* which hid them all. We only want to add Plug and Play Software Enumerator and nothing else so select and install only that.

by yaanik

I just had this problem and it has cost me about 2 hours of my life to fix using the methods outlined above. The big problem was that I had a heck of a time finding "swenum.inf". Google searches took me nowhere, I ended up finding a copy of "precopy2.cab" on a Russian ftp site (using filesearching.com).

With the intent to help others with this problem in the future, I'm going to past the contents of the (1.7kb) swenum.inf file below. Just copy the text between the "-- cut --"'s, paste it in notepad, and save the file as "swenum.inf".

-- cut --

[Version]
signature = "$CHICAGO$"
SetupClass = BASE
Class = SYSTEM
ClassGUID = {4d36e97d-e325-11ce-bfc1-08002be10318}
Provider = %Msft%
LayoutFile = layout.inf, layout1.inf, layout2.inf

[BaseWinOptions]
SWENUM_BASE

[SWENUM_BASE]
AddReg = swenum.base.addreg
CopyFiles = swenum.base.copy

[DefaultInstall]
AddReg = swenum.base.addreg
CopyFiles = swenum.base.copy

[swenum.base.addreg]
HKLM,Enum\Root\SwEnum\0000,HardwareID,,SWENUM

[swenum.base.copy]
swenum.inf

[DestinationDirs]
DefaultDestDir = 10,system32\drivers
SWENUM.CopyDlls = 11
swenum.base.copy = 17

[Manufacturer]
%Msft%=Microsoft

[Microsoft]
%SWENUM.DeviceDesc%=SWENUM,SWENUM

[SWENUM]
CopyFiles=SWENUM.CopyFiles,SWENUM.CopyDlls
AddReg=SWENUM.AddReg

[SWENUM.HW]
AddReg=SWENUM.HW.AddReg

[SWENUM.NT]
CopyFiles=SWENUM.CopyFiles

[SWENUM.CopyDlls]
streamci.dll

[SWENUM.CopyFiles]
swenum.sys
ks.sys

[SWENUM.AddReg]
HKR,,DevLoader,,*NTKERN
HKR,,NTMPDriver,,swenum.sys
HKR,,NoUseClass,,1

[SWENUM.HW.AddReg]
HKR,,ConfigFlags,1,00,40,00,00

[SWENUM.NT.Services]
AddService=swenum, 0x00000002, SWENUM.ServiceInstall

[SWENUM.ServiceInstall]
DisplayName=%SWENUM.DeviceDesc%
ServiceType=%SERVICE_KERNEL_DRIVER%
StartType=%SERVICE_DEMAND_START%
ErrorControl=%SERVICE_ERROR_NORMAL%
ServiceBinary=%10%\system32\drivers\SWENUM.sys
LoadOrderGroup=ExtendedBase

[Strings]
; non-localizable
Ms

by yaanik

truncated
-- cut --

[Version]
signature = "$CHICAGO$"
SetupClass = BASE
Class = SYSTEM
ClassGUID = {4d36e97d-e325-11ce-bfc1-08002be10318}
Provider = %Msft%
LayoutFile = layout.inf, layout1.inf, layout2.inf

[BaseWinOptions]
SWENUM_BASE

[SWENUM_BASE]
AddReg = swenum.base.addreg
CopyFiles = swenum.base.copy

[DefaultInstall]
AddReg = swenum.base.addreg
CopyFiles = swenum.base.copy

[swenum.base.addreg]
HKLM,Enum\Root\SwEnum\0000,HardwareID,,SWENUM

[swenum.base.copy]
swenum.inf

[DestinationDirs]
DefaultDestDir = 10,system32\drivers
SWENUM.CopyDlls = 11
swenum.base.copy = 17

[Manufacturer]
%Msft%=Microsoft

[Microsoft]
%SWENUM.DeviceDesc%=SWENUM,SWENUM

[SWENUM]
CopyFiles=SWENUM.CopyFiles,SWENUM.CopyDlls
AddReg=SWENUM.AddReg

[SWENUM.HW]
AddReg=SWENUM.HW.AddReg

[SWENUM.NT]
CopyFiles=SWENUM.CopyFiles

[SWENUM.CopyDlls]
streamci.dll

[SWENUM.CopyFiles]
swenum.sys
ks.sys

[SWENUM.AddReg]
HKR,,DevLoader,,*NTKERN
HKR,,NTMPDriver,,swenum.sys
HKR,,NoUseClass,,1

[SWENUM.HW.AddReg]
HKR,,ConfigFlags,1,00,40,00,00

[SWENUM.NT.Services]
AddService=swenum, 0x00000002, SWENUM.ServiceInstall

[SWENUM.ServiceInstall]
DisplayName=%SWENUM.DeviceDesc%
ServiceType=%SERVICE_KERNEL_DRIVER%
StartType=%SERVICE_DEMAND_START%
ErrorControl=%SERVICE_ERROR_NORMAL%
ServiceBinary=%10%\system32\drivers\SWENUM.sys
LoadOrderGroup=ExtendedBase

[Strings]
; non-localizable
Msft = "Microsoft"

SERVICE_KERNEL_DRIVER = 1
SERVICE_DEMAND_START = 3
SERVICE_ERROR_NORMAL = 1

REG_SZ = 0x00000000
REG_MULTI_SZ = 0x00010000
REG_EXPAND_SZ = 0x00020000
REG_BINARY = 0x00000001
REG_DWORD = 0x00010001

; localizeable
SWENUM.DeviceDesc = "Plug and Play Enumerator"

-- cut --

by roshanak3002

hi
i have the same problem with my system sounds too
maybe it is because of installing win xp sp2.
my audio device is onboard on intel 945pl chipset and it is realtek ac97
i am so confused of this problem
did you solved it?
i will be thankfull is you send me the solution with yours.
thanx bye

This discussion is closed to new replies.