14 replies
by tlippert
On the misbehaving computer check all tcp/ip settings. Compare them to the computers that are working. Pay particular attention to gateway and proxy settings. Look in both the dialup adapter and nic settings. If not there check the tcp/ip address and subnet mask for proper settings. Is the jetdirect software installed? If so reinstall the software.
Check the details tab to see if the print job is being sent to the right tcp/ip address or the proper UNC.
Hope this helps.
by saihib
by ann777
Also check Internet Explorer --> Tools --> Internet Options --> Connections and verify that this is set to "Never dial a connection" OR use "Dial whenevr a network connection is not present." Test again.
by saihib
by saihib
by admin-stuart
Yes, I've seen people never close their questions many times.
Good luck.
by saihib
by vh_s
This would happen if you don't optimalize the use of hosts file.
The problem with JetDirect is that you could only reach it by broadcasting to the networks. By default, broadcast trigger DUN.
Edit files HOSTS. (without extension) or create one in your C:\WINDOWS directory.
Add this entry..
something like this:
192.168.0.20 printserver
By then, your network would use broadcast as last resort.
Hope it helps.
by vh_s
One other thing to optimalize,
Go to Network Applet in Control Panel,
click Client For Microsoft Network
click Properties
choose Quick Logon in the radio button in the lower part of the box
That would prevent DUN to be called each time you start-up your computer.
by saihib
by pierrejamme
by saihib
by saihib
by saihib
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending