Question Locked

What can I do about a "no bootable devices" error

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a dell inspiron with windows xp and everytime i try to start it i get an error message reading "no bootable devices". i tried putting in the operating system cd but i got a message saying something like no hard drive installed, xp failed to boot... is there anything i can do about this?!

3 replies

by oh smeg

Then the HDD or the M'Board or Data Lead is faulty. You should run the HDD Makers Testing Utility which you can get from here

http://www.tacktech.com/display.cfm?ttid=287

You should run this Utility First on the computer and if the drive fails remove it and retest in a different computer. If it still fails the HDD is faulty but if it passes the Second Test replace the Data Lead and test again if it still passes the M'Board in the first computer is damaged and needs the HDD Controller replaced. If it fails the Third Test the Data Lead is faulty and that needs replacing.

Of course if you did not use the Dell Recovery CD for this Model Insperon then it could just be the lack of the correct SATA Driver.

Col

This discussion is closed to new replies.