3 replies
by wheresyuros Accepted solution
by jamesrl Accepted solution
You need to know whether you need to update your bios.
I would go to the Hewlett Packard site and find the support section and do a little sniffing about your model.
It is quite possible you don't have to do anything to your BIOS, and if you don't have to change anything don't.
James
by thechas Accepted solution
I can't recall ever having to flash a BIOS specifically for an XP upgrade. I have flashed the BIOS to support hardware upgrades that I was installing at the same time as an XP upgrade.
Here is my plan for XP upgrades:
Get as much RAM for your system as you are willing to pay for. Minimum, 256MB. 512MB to 1GB if the motherboard supports it, and you can afford it.
Make sure that the RAM is compatible with your system!!!
Check for XP drivers for your printer and scanner along with any special devices you have attached to your system.
My general rule of thumb, is that if the manufacture does not have an XP driver for your device, expect to end up replacing it with a newer model.
Do the same for any software you plan to use with XP.
Here, the biggest problem is with CD/DVD burning software and DVD movie players.
Back up any and all "critical" files and settings.
If at all possible, it is better to install XP onto a clean hard drive rather than installing it as an upgrade. This is more difficult with a name brand system as you may not have the Me CD.
If you decide to upgrade, insert the XP CD, and run the upgrade advisor.
If not on the list of software to remove, I strongly recommend uninstalling the following:
Microsoft .Net
Anti-Virus
Firewall
Firefox and other non-IE web browsers
CD burning software.
Now you are ready to install XP.
Chas
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending