Question Locked

what is a crossover network?

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
jsut give on answer for my assignment

4 replies

by Former member

Here is a short answer to your question. Umm well sort of. Hope this helps you.

A crossover cable network is a computer network with two computers connected with a crossover cable. If you have two computers at home, and want to share files, programs, and printers, the crossover cable network is the easiest and cheapest solution for you.

Requirements:

* Two computers with network supported.
* A crossover network cable.

Most of today's home computers are coming with a network card installed. No need to purchase network cards separately. But you need to purchase a crossover network cable separately. You can find it in most of the computer stores.

A crossover network cable is different than the normal straight network cable. It has two pair of lines crossed over from one end to the other end. The following diagram shows you the differences.

A normal straight network cable has 8 positions at both ends. There are 8 lines connecting to both ends to exactly the same positions:

End A End B Note

Position 1 <---------------> Position 1
Position 2 <---------------> Position 2
Position 3 <---------------> Position 3
Position 4 <---------------> Position 4 Not used
Position 5 <---------------> Position 5 Not used
Position 6 <---------------> Position 6
Position 7 <---------------> Position 7 Not used
Position 8 <---------------> Position 8 Not used

A crossover network cable has 8 positions at both ends, same as the normal straight cable. But there are 2 pairs of lines crossed over. The first crossed pair of lines connects position 1 from one end to position 3 on the other end. The second crossed pair of lines connects position 2 from one end to position 5 on the other end:

by sebastian zdrojewski

Actually you can have the need of a crossover cable also when stacking some switches that does not support MDI/MDI-X (that is: switches that can be stacked with a straight cable), like Cisco Catalyst switches. The same principle is used to create Ethernet hardware loopbacks.

by syphersoul(sp)

a crossover network is when a crossover cable is used to connect 2 pc called direct connection network to one another giving access to communicate. If you wanted to share a network connection you would have 2 ethernet cards in one machine use a crossover cable to connect second computer and enable ics using computer 1 as a gateway.

This discussion is closed to new replies.