Question Locked

What is going on with my old ram and second slot?

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a Veritech 512 MB 400 mhz ram, but my mainbord use it at 266 mhz. Veritech is at first slot and it works. I have bought a Kingston 512 MB 400 mhz ram. When I remove veritech and put Kingston to first slot, it works. When I remove veritech and put Kingston to second slot, it works. But when I put veritech to second slot, my computer don't boot.(with or without kingston.) When I put veritech to first slot and kingston to second slot, it don't boot, too. What is the problem?

(Detailed explanation of "don't boot": power light and harddrive light lights but there is no display on the monitor.)

Thanks

(And a summary of this long post ;)
Rams: Kingston 512mb 400mhz Veritech 512mb 400mhz

slot1________slot2________does it work?
veritech________empty_________works
kingston________empty_________works
empty__________kingston_______works
empty__________veritech_______doesn't work
veritech________kingston_______doesn't work
kingston _______veritech_______doesn't work

3 replies

by oh smeg

the Original RAM with a stick of the Kingston so that you can use more than 1 stick.

With the above I'm assuming that you have ready access to Kingston RAM and no access to any veritech RAM. If you do you can use the Veritech RAM instead of the Kingston. Though to be honest I prefer to not only use the same type and brand RAM but also from the same Manufacturing Batch to prevent problems arising from any mismatched speed of the different RAM Sticks.

Col

by jason.l.oswalt

I cleaned up memory modules and slots, and I remove my old dial-up modem, and it worked like a charm! Thanks!

This discussion is closed to new replies.