Discussion Locked

What is MTTR

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

There seems to be some confusion within my ranks as to what Mean Time to Repair should include when developing a metric. What is the true definition of MTTR?

Thanks...

3 replies

by shiny_topadm

Hi, as I'm sure you know, "MTTR" is defined (here from the website: http://www.isixsigma.com/dictionary/MTTR-429.htm ) [you know, remove the spaces] as...

"Mean time to repair.

This is the average time to repair a machine back to acceptable operating conditions. Also known as tool time, meaning once the machine breaksdown, the actual time spent on arranging spares, resources, planning and executing the tasks and then bringing it back to operating condition. This must be as low as possible."

As with any and all "Quality System" definitions, your specifics are determined by your industry, and the biggest challenge to implementation is agreeing on the measurement. If there is no industry standards body that you need to submit your measurement to, an "internal" agreement is what you need and that's going to be difficult to offer from the info you provided. hth,
---Will

by shiny_topadm

No, I've not heard ...to repair, but it points out that the first step is for everyone to agree to use the same terms and abbreviations for "things". That's probably why most contracts define all relevant terms first; so if I say we're going to evaluate your measurement of "MTTR" we must first agree on what we're counting!

This discussion is closed to new replies.