Question Locked

What is the relevance of the bandwidth rating of a lan cable?

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I see in the ratings of CAT3 that it has a 10mbps speed, and 16MHz bandwidth, likewise for fiber optics having bandwidths of 250 and 500 MHz. What is the importance of these frequencies? Thanks

Also, off topic, in a 4 pair utp cable, how many of those wires are actually being used?

7 replies

by oh smeg

Exactly what they say in a CAT 3 Cable it can transfer 10 MBS at 16 MHZ so it can transfer 10 Megabits Per Second at 16 Megahertz Frequency above this and the cable starts to suffer from Cross Talk where the other Pairs of Wires start to pickup the Inducted Frequencies and this degrades the Data being transmitted.

In answer to your second question in a 4 Pair Wire all 4 pairs are utilized.

Col

by erilaurence

Exactly how is this frequency generated? is this a byproduct of transmitting data or is this frequency necessary in transmitting data? does it follow that the faster you transmit, the higher frequency you will need/you will get.

i heard from someone, forgot who, that not all 4 pairs are utilized for data. that's why they put in poe because not all wires are utilized, how many of the 4 pairs are utilized for data?

thank you

by oh smeg

Is generated by the Network Interface between the computer and the CAT5 Cable that connects the computer to the network.

As for as I know with the Gigabite Cables that i use all of the 4 pair are used. If there is a dead pair the cable to that terminal doesn't work. I believe that the same holds true for 10 and 100 MBS Networks. But it has been a very long time since I have worked with 10 MBS Networks.

Col

by tardcart

GBE is the only one that utilizes all 4 pair. 10 and 100 Mbps connections only use 2 pair. In a pinch you can split one cable into two connections.

by erilaurence

Is the frequency generated by the Network Interface a byproduct of transmission or is the frequency necessary to communicate?

This discussion is closed to new replies.