Question Locked

What switch(es) would you recommend for a 500 person gaming event?

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

What switch(es) would you recommend for a 500 gaming event/LAN Party?

I am looking to set up a gigabit network for 500 people. This equipment will be primarily used for the hosting of LAN Parties, so speed and reliability are the most important features I am looking for.

I have little experience with networking on this scale and my budget is $8000.

4 replies

by older mycroft

'Switches' are one thing...

What about the cabling involved. How many floors ?

500 people create a lot of heat - what about aircon (for the 'puters) ?

by benjaminbaragar

Old Mycroft,

The location is a sports centre. We have access to the whole facility and it will be taking place on the lower level of the facility.

We will be purchasing all new Cat6 ethernet cable in bulk. We will be measuring, cutting and adding the ends ourselves.

Heat was a concern, but I have been assured that it will not be a problem. They regularly have over 1000 people in the building and their system can handle that with ease.

As far as my original question is concerned, do you have any suggestions??

by oh smeg

[i]No one ever got fired for buying IBM[/i] well in a case like this you can say [i]You'll never get complaints about buying Cisco.[/i]

http://www.cisco.com/en/US/products/hw/switches/#~hide_v3~+hide-id-trigger-g1-data

BUt depending on how long these are required for and how they will be setup Linksys are cheaper nearly as good

http://www-mk.linksys.com/servlet/Satellite?c=L_Product_C1&childpagename=MK%2FLayout&cid=1175240170620&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=7062064875H02

However if this is just to be a One off and long term reliability isn't so important or that these will be used irregularly and not 24/7 then Repotec make some useful Switches.

http://www.repotec.com/default.asp?pagename=/Switch-Hub/RP_G3224D.htm?pagename=Switch-Hub/RP_G3224D.htm

The issue here isn't the Switches however it's more the Design of the LAN that will affect the way that the system works. Also as for making up your Own Cables you'll need a Cable Tester and the easy to use the EZ-RJ45 Plugs you'll have far fewer Bad Crimps with these than the standard RJ45 Plugs.

http://cableorganizer.com/ez-rj45-network-plugs/

Col

This discussion is closed to new replies.