Question Locked

When I New device not showing up as drive letter.

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

When I plug in my MP3 player it shows as connected, however when I go to Windows explorer, it does not show as a drive letter. The same USB port works fine to download pictures from my camera. No other USB ports recognize my MP3 player. This is a new MP3 player but the same as an old one I have that used to work fine. Now neither one show up as a new device with a letter designation. The problem is not the Disk Manager issue.
Thanks

8 replies

by squirrelonfire

Hardware?

Use the mp3 player in another computer. If the problem persists, the problem might be the mp3 itself.

Software?

The fact that windows explorer will designate a drive letter for some external devices is because of their drivers. Make sure you install all the software that comes with that mp3 player before plugging it in the computer.

I hope this help. It it doesn't, post me another question.

by donnyandlynn

I bought 3 new Sansa MP3 players for Christmas for my kids. I already had one for myself and have never had any problems with it. The last time I connected it to my computer to download music (about a month ago) it worked fine. I have used several different MP3 players and several different cables, including my old MP3 player and cable, and none are getting recognized. However on the MP3 player they all show as connected. When I go to Disk Management nothing shows up. I have run Reg Cure and Webroot Spy Sweeper. Any other suggestions? My kids are hammering me to load some songs on their new MP3 players!
Thanks

by ashishs

I use USB 2.0 ports for my Ipod. Are you also using USB 2.0 ports for your mp3 player? Certain devices will not work on USB 1.0 ports.

by the scummy one

it is conflicting with another drive letter and the drivers got confused.

Or, it needs to be formatted.

To check this, go to control panel -- administrative tools -- computer management -- disk management.

It should list all drives and drive letters. Find the USB drive and change the drive letter. See if it works. If not, you may need to format the drive.

by donnyandlynn

There is no software that needs to be loaded. It is a Sansa c200 MP3 player. The only thing on the installation disk is a user guide (no help) and a media converter, that I had already loaded with my first MP3 player, but reloaded anyways. The media converter is not needed to load songs. I never used it before.

by rob miners

Try this workaround. It may kick in.

Open explorer and create a new folder and share it. Something like Music. Insert the Drive. Open Computer Management and right click on the removable disk. Select Change Drive Letter and Paths. Select Add. Navigate to the Shared folder and Select it. From now on when you insert the Memory stick you will have a copy of the contents in the new share. Just navigate to the new folder or put a shortcut to it on the desktop.
Edit:
Also here is a link to some good reading.

http://www.usbman.com/Troubleshooter%20General.htm

This discussion is closed to new replies.