48 replies
by bizzo
While the floppy disk itself is 3.5" wide, -very- early drives for it were the same size as drives for 5.25" floppies, and both size drives mounted in the same 5.25" bay.
4" drives for 3.5" floppies appeared very quickly, but case manufacturers were slow to build machines with two sizes of drive bays. Instead, there were adapters used to mount a 4" drive in a 5.25" bay - carriages, rails, etc.
Eventually manufacturers began building systems with two sized of bays 5.25 and 4".
The drive is called a 3.5" drive not because of the physical size of the drive itself, but because of the size floppy disks it uses. The resulting bay is also referred to the same way because until recently all you could mount in one was a 3.5" drive.
Oh, and "diesel cars" aren't made of diesel; they're called that because of the fuel they use. Also, "dairy cows" aren't made of milk. I could go on about parking in driveway and driving on a parkway, but that's been done to death (literally).
by kirk227
by seanferd
The 5.25" bay got it's name the same way. 5.25" drives were called that not because of their physical width, but because they used 5.25" floppy disks. 5.25" bays held 5.25" drives; they aren't 5.25" wide.
Same deal with 8" floppy drives; they used 8" disks, they weren't 8" wide.
In our next class guest instructor w2ktechman will discuss 1200 baud modems, and why they didn't actually transmit 1200 bytes per second.
by the 'g-man.'
by kirk227
"...a steering wheel would still be called the reins and a space helmet would be an aviator's cap."
Inputing a telephone number is still called "dialing", although phones haven't had dials in decades. Televisions don't either, but advertisers still tell you to, "Don't touch that dial!"
You've left the realm of logic and entered the vague world of etymology.
by seanferd
Properly, it is a 3.5" disk drive. It is a machine which drives a 3.5" disk. This is logically correct, shortened names notwithstanding.
<3.5" disk>
not
<3.5">
by the 'g-man.'
The question was:
Why do they call them 3.5 inch drives?
The answer I provided is correct.
Why on earch would you apply that naming convention everywhere anyway?
It is a naming convention for hard drives based on the disk platter size, so what?
You comments made no sense and reek of somebody looking to start arguments despite getting the correct answer.
Why are you called Kirk227?
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Based on that then I'm using Keyboard476462469454
Mouse46734958639869865
Screen34578547873678735
Sad.
by kirk227
by oh smeg
Every HDD that I have ever trashed has 3.5 Inch Platters in it.
They are 3.5 inch in Diameter not any other size but then again I only use Seagate, Samsung, Fujitsu and Hitachi Drives none of the others.
As I remove the platters and destroy them it's easy to compare the size as they are all in a bundle before going into the furnace.
Col
by kirk227
by oh smeg
Than the Media that they contain. So a 3.5 Inch drive takes 3.5 Inch Media and when it comes to HDD the Platters are 3,5 Inch in Diameter. Just as a 2.5 Inch Drive has 2.5 Inch Platters. If you actually measure a 3.5 Inch HDD it's not 3.5 inches wide either.
4 Inches for a 3.5 Inch Drive Bay is a standard measurement that indicates the size of the Media used to store Data on, not the size of a Drive the drives have to be larger to fit the media in. :)
However my favorite is with Metric Conversions in every Metric Country it's not uncommon to say use a XX mm Socket here. They then go on to say a XX mm Socket with a 1/2 inch drive. I could never quite workout how the French/Germans for argument sake can talk in Metric for the Socket Sizes but in Imperial for the Drive Sizes for the Sockets. The standard Drive sizes for all Sockets are 1/4, 3/8, 1/2, 3/4 and 1 Inch.
Then depending on the actual measurement standard used sometimes the Size can refer to the size of the Head across the Flats or the size of the threaded area in it's Diameter. Wire and Metal Gages are similar they make sense till you think about things. :D
Col
by nicknielsen
by hal 9000
That both Wire and Metal Gages are different as one gets smaller the numbers get bigger and just as you have wrapped your head around that you hit the other one as the numbers get smaller the thickness gets bigger. :D
Or have I messed that up again? :(
Col ]:)
by seanferd
You know, who is modifying whom?
Good call, sir!
by bizzo
Because they fit into a bay designed/sized for a 3.5" floppy drive.
Similarly, internal CD/DVD drives fit into a bay designed for a 5.25" floppy drive.
The measurements are for the size of the floppy disk that fits into the drive that the bay can hold.
I suppose it's just old terminology that hasn't changed, and does it really need to?
by hal 9000
So that the average person can be as confused as Hell.
After all what's the point of keeping a Standard that everyone understands when they don't understand the Bloody Computer anyway? :D
[b]Confuse the Hell[/b] out of them I say and keep them confused it's easier that way. :^0
That isn't a 5.25 Inch Slot it's a DVD Slot and that isn't a 3.5 Inch bay it's a 500 GIG Bay. Sort of difficult when the more commonly used HDD are bigger than 500 GIG though. :p
Col ]:)
by seanferd
by w2ktechman
notebook drives go by drive size (1.8"/2.5", etc.) however desktop drives dont ?:|
Now please let me know how to confuse the HAL a bit more now :^0
by jaqui
by seanferd
24", 14", 8" ?
And how would I get one of these into an AT case?
by the 'g-man.'
Has 3.75 platter size.
SHOCK!
by seanferd
by the 'g-man.'
by seanferd
by kathy.melvin
by kirk227
by the 'g-man.'
Removable disks are measured by the physical size if the enclosure that would house them when accessed. This is to indicate the size needed to house the access device.
Fixed Hard Disks by platter size inside them.
Glad we cleared that up.
by hal 9000
Something like Moly Di Sulfate would be my first choice. It's super slippery, Nonconductive and doesn't rub off.
If you apply enough you may even get one of those old open real Tape Drives from the Old Mainframes to fit in a PC Case as well. :0
Col
by tonythetiger
was it 40 gigabytes, or 40,000,000,000 bytes?
:)
by seanferd
by nicknielsen
by seanferd
by nicknielsen
by seanferd
by hal 9000
I seem to remember that the NB Drive in my hand at the moment has a 2.5 inch platter in it. It's an old 2.5 inch 80 GIG NB Drive that died a while ago after the Guarantee had run out so I took a look see.
Not sure about the 1.8 inch drives as I haven't had one fail yet. :p
Col ]:)
by w2ktechman
so easily confused.
Ooh, look over there!
by oh smeg
Do you want me to look?
At the Semi Trailer that I have just Transported to 300 feet above The Scummy Ones place of residence perhaps? :^0
Col
by oh smeg
I change TR Accounts log in with a different User Name & Password and nothing happens. :(
Third Time I have tried to change User Accounts and it's not working.
Col
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending