6 replies
by jneilson Accepted solution
by formerly callpete.com Accepted solution
by cg it Accepted solution
and Windows Server 2003 RC 2 SP2 both in a workgroup and domain environment. There is an issue with the Windows SBS client connection during logon but all that does is create an annoying popup box. Doesn't effect logon or use of server resources.
I like Vista business. Where I've seen problems is where Administrators created scripts or programs to run for W2K/XP and those aren't compatible with Vista. Some logon scripts and admin scripts have a difficult time running with UAC.
by jneilson Accepted solution
by davidt5 Accepted solution
by Former member Accepted solution
You can download the update from the following link:
Link Layer Topology Discovery (LLTD) Responder (KB922120)
All this is good and well, however there's one little catch. By default, you can?t run the LLTD responder update under Windows 2003.
However, you can try to force the update to run by performing these steps:
Note: Installing LLTD on Windows Server 2003 is NOT SUPPORTED by Microsoft, and has mixed results. Do NOT do it if you don't know what you're doing, and if something breaks, don't expect anyone to help you.
1. After downloading the update, navigate to the folder where you've saved the file and right-click it. Select Properties.
2. Next, in the Compatibility tab, click to select the Run This Program in Compatibility Mode for, and in the drop-down list select Windows XP. Click Ok.
3. You can now install the update. You will not be prompted for a reboot, but you might want to reboot anyway.
4. Next, you need to install the LLTD protocol in the network adapter's properties. Go to the downloaded file from step 1, and double-click on it as if to install it. Do NOT proceed with the installation, just leave the welcome screen open. Now go to your hard disk, and on the partition with the largest available free space you'll find a folder which's name is made of many letters and numbers (name varies, so there's no point in typing it here).
5. Open the network interface's properties screen, and click install.
6. In the network component type click Protocol and the click on the Add button.
7. In the Select Protocol window click Have Disk, and browse to the folder from step 4. In that path, look for the file called rspndr.inf. Click Ok.
8. In the Select Network Protocol window click the Link-Layer Topology Discovery Responder and click Ok. After a short installation, the new protocol should be available in the network interface's properties screen.
9. To be safe, reboot the computer. It should now be visible on the network map.
As noted above, this procedure is not supported in any way. Use at your own risk. :)
I did this to my server and it works well, but then you might have a different set up.
Please post back if you have any more problems or questions.
If this information is useful, please mark as helpful. Thanks.
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending