9 replies
There's still a 137 GB storage limit barrier with some systems. Depending on the drive's manufacturer, there are programs that you can run to overcome this limit. Maxtor, for example, has a "big drive enabler" executable that will fix the problem.
http://www.maxtor.com/en/support/downloads
Check with the manufacturer of your drive (their Web site), and they'll probably have the same thing.
I use Maxtor drives, and have used their big-drive program many times. It works fine. However, I've not tried it with another drive's manufacturer, but it'll probably work on any drive.
by bigfarfel
by thechas
If memory serves me well, you need at least Service Pack 3 of Windows 2000 to get past the 137GB barrier.
(For Windows XP, you need SP1 or latter.)
Assuming your install CD is SP2 or older, your best option would be to create a "slip-stream" CD with SP3 or SP4 on it.
That way, you would be able to install with full support for your large hard drive.
Here is a link to a MS Knowledge Base Article on slip streaming drivers:
http://support.microsoft.com/default.aspx?scid=kb;en-us;814847
Chas
by bigfarfel
I have all service packs for 2000 Advanced Server
by willcomp
Chas is correct. Here's a MS article that explains things in more detail.
http://support.microsoft.com/default.aspx?scid=kb;en-us;305098
I recommend that you Do Not use drive manufacturer's large disk support utility. It will modify boot sector and quite likely cause problems with a server OS.
Dalton
by bigfarfel
by otl
Maxtor put it on the outside of the box !
Drives larger than 137GB require Windows 2000 SP3 or higher, XP SP1 or higher, or ATA/133 PCI card.
Verbatum from the side of the box !
by bigfarfel
I'm not using Maxtor and my drive did not come in a box.
by bigfarfel
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending