Question Locked

Wi-Fi not working when telephoneis in use

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi Gurus,

I use the telephone service and cable internet provided by the same cable company. I have a cordless phone of 2.4 GHz frequency. And the wireless Internet router is 802.11g .

Whenever I receive or make a telephone call, my wireless internet ceases to work. What is the reason? How can I avoid it?

Thanks in advance.

7 replies

by lowlands

Your wireless router and cordless phone both wotk on the same frequency (2.4 GHz). My problems went away when I started using a 5.8 GHz phone. But you can also try playing around with the wireless channel your router uses. On the setup webpage for the thing you can probably choose between some 11 different frequencies.

by tony_s

Thanks very much Lowlands for your reply!
I'll play around with the frequencies and will let you know if it works.

Thanks again.

by tony_s

Unfortunately the setup shows only 2.4 Hz as the available frequency. Unfortunately it seems the only option for me is to change the phone. :(

by jdclyde

because that has an effect on the frequency.

Go from one end (1) to the other (12) and see if it will make a difference.

If not, then yes, new phone.

by tony_s

Thank you jdclyde.
I'm sorry I am not familiar with the networking terminology. What do you mean by a channel? Is it the physical port on the router?
Thanks once again.

by jdclyde

on the page where you would set up security, there will be a place to determine which "channel" you wish to broadcast on. if two access points are close, they have to select different channels.

look at the help menu in the access point, and it will tell you what you need for that brand.

This discussion is closed to new replies.