14 replies
by aczel Accepted solution
by wancona Accepted solution
You want to check to be sure that your dns is not staticly assigned. Make sure that you are recieving your ip address from her router and not staticly assigned. You can check these by going to network connections, then right click and go to properties on the wireless connection. Go to TCP/IP then click properties. They should be on automatically assign. Also, double check with her configurations on her computers to be sure that they are matching up.
On last thing I can think of checking is the network key that is saved in the wireless profile. To check this, go to your wireless network settings and click status when you right click. Go to the middle tab, I forget what the name is, and look for your sisters wireless SSID in the list. Once you select it, click edit, or properties or whatever it is, and try entering the network id there.
by aczel Accepted solution
by aczel Accepted solution
by michael kassner Accepted solution
Are you entering the WEP key in ASCII or Hex code? Many devices do not hash ASCII passcodes into the same Hex Code. Not sure why, but it is more of a problem than most people realize. So, maybe try entering the passcode using Hex code if you are not already.
If you feel you are past the association/authorization point, try the command ipconfig and see if you are getting the correct DHCP information from the router. You can compare it to the ipconfig information being displayed on a connected workstation.
Finally if that is identical except for the assigned IP address, try pinging the default gateway that is listed in the ipconfig information.
by maniacman Accepted solution
by aczel Accepted solution
by older mycroft Accepted solution
by michael kassner Accepted solution
I am still slightly confused as to if you have tried entering the WEP key in Hex Code instead of ASCII. If you do not want to do this the only other way to know for sure that you are not having an encryption issue is to figure out how to disable WEP encryption on the router and run a test.
Also you may want to try the ipconfig /all command on your sister's computer and then on your notebook. Compare the results, as everything except the assigned IP address should be the same.
I am not sure if anyone has mentioned this, but do you have the MS firewall configured other than default or any third party security applications on that computer? If so for a test disable them as well.
One last test would be to ping the default gateway that you see in the ipconfig information as well as websites.
by aczel Accepted solution
by older mycroft Accepted solution
I don't think you've mentioned yet, but HOW MANY wireless connections are already active at your sister's residence?
Also, have you checked with your sister that her router isn't set to restrict 'new connections'?
Also, is the router pre-configured to your sister's existing wireless connections? If so, your connection might be getting the scraps from the bandwidth.
by aczel Accepted solution
by older mycroft Accepted solution
Because you had to input the WEP key into the Xbox, it's safe to say that the security setting are ON, to some extent.
No security settings = no WEP key.
To 'see' how the router is configured you'd need to connect your laptop to the router with an ethernet cable. When you are hardwired to the router you can configure it to suit, a bit like going into your laptop BIOS screen.
I'm curious to know: you stated that the only wireless problem is at your sister's residence, yet the ONLY wireless equipment there is YOUR Xbox/laptop. I was expecting other computer equipment, otherwise why is there a wireless router present?
by older mycroft Accepted solution
If you managed to input the WEP key into your laptop, try the following:
Right click on your wireless icon in the systray > pick 'View Available Wireless Networks' > 'Change Advanced Settings' > pick the left hand Tab 'General' > click the 'Configure' button > 'Advanced' tab > in the 'Property' window, the top 4 items are as follows:
Ad Hoc Operational mode
AP Operational mode
Basic Rates to Start Ad Hoc/AP
Channel to Start Ad Hoc/AP
Set the first three to:
Mixed Mode (11b/g)
Mixed 11b/g Mode
All
The 4th heading deals with which wireless channel your laptop transmits on, initially at least.
I get the best results from setting this channel to either 6 or 11. Of course, the UK might be different to your local transmission s. However, you've got 14 channels to pick from. One of them might improve your present situation as you illustrated in your Peermail.
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending